New "rig". She's got a real low crawl ratio...

Show off your build here!

Moderator: Club Officers

Post Reply
Redneck7
Posts: 179
Joined: Fri Sep 09, 2005 4:45 pm
Location: Suffolk

New "rig". She's got a real low crawl ratio...

Post by Redneck7 »

Image

Image

Image

Massey Ferguson 135 with Perkins 3cylinder Diesel. She's of unknown vintage, but aside from a fuel leak out of the sediment bowl (new pump/bowl on order) she's in pretty good shape. Fires right up every time I hit the key.

Now to find an affordable box blade and then a disc...
1995 Suburban (big and slow)
1989(ish?) F-250 (doesn't move)
User avatar
TerryD
Posts: 1905
Joined: Mon Sep 04, 2006 7:57 pm
Location: Covington, Va
Contact:

Post by TerryD »

That's a good looking little tractor! We've talked about getting something similar to it to use in our barns at home.
Terry
Offroading: The hobby of turning perfectly good vehicles into scrap metal. :cool:
Redneck7
Posts: 179
Joined: Fri Sep 09, 2005 4:45 pm
Location: Suffolk

Post by Redneck7 »

Thanks.

I'd been looking for a while since we just bought some property...my neighbor had told me that the 135/150/165 Massey's were real good tractors back in the day, so I was excited to find that one. Got a decent deal (I think) and the thing fires right off, so I really can't complain. Contemplated spending less and getting a gasser (8N Ford or similar) since diesels bring so much more money, but I'm already happy I got the diesel. She just purrs along. My neighbor has a Ford 601 gas and its constantly getting carb or ignition issues. Have another buddy with an 801 Ford, same thing...

This sucker either has compression or it doesn't and if it has it, its gonna run. (I say that as I wait on a fuel pump...tomorrow the starter will probably shit out...)

Other good thing about those Masseys is that you could get em with power steering. Mine doesn't have it, but lots of 135's and 150's do.


EDIT: Maybe one day I'll spice it up a bit: http://www.youtube.com/watch?v=uk-2ViFLwPY
1995 Suburban (big and slow)
1989(ish?) F-250 (doesn't move)
User avatar
TerryD
Posts: 1905
Joined: Mon Sep 04, 2006 7:57 pm
Location: Covington, Va
Contact:

Post by TerryD »

THAT'S SWEET!
Terry
Offroading: The hobby of turning perfectly good vehicles into scrap metal. :cool:
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Post by jstables »

we've got a massy ferguson at home as well its a TO-20 though. :mrgreen:
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
Redneck7
Posts: 179
Joined: Fri Sep 09, 2005 4:45 pm
Location: Suffolk

Post by Redneck7 »

jstables wrote:we've got a massy ferguson at home as well its a TO-20 though. :mrgreen:
Looked at a TO-20 on the side of the road on the way to buy this tractor. Wanted 1/2 what I paid for the 135, but it looked like the owner had beat it up and then just spray painted the whole thing...

Mowed a few acres after work today. I was happy with its performance.
1995 Suburban (big and slow)
1989(ish?) F-250 (doesn't move)
hklvette
Posts: 514
Joined: Thu Feb 01, 2007 7:04 pm
Location: Christiansburg

Post by hklvette »

that's a nice tractor. I'd like to replace our allis WD-45 with something like that.
-Henry

'98 XJ, '05 Grand Prix GTP, '86 Fiero, '70 M35A2, '77 M880
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Post by jstables »

Redneck7 wrote: Looked at a TO-20 on the side of the road on the way to buy this tractor. Wanted 1/2 what I paid for the 135, but it looked like the owner had beat it up and then just spray painted the whole thing...
that is about the condition we(my dad) found ours in. since we have rebuilt the engine, hydraulics, governor and rewired it twice. the only thing it needs now is a couple cans of paint. :lol2:
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
Post Reply