Camo TJ
Moderator: Club Officers
Re: Camo TJ
Solid. Gonna almost have to run race fuel lol.
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
Nah Ill just have to do what gus does in his bronco run 93 octane and then dump a bottle of octane booster in....
And its a good thing I am coming down this weekend cause my dumb ass had parts shipped to the house down there on accident.... once I get everything in hopefully ill be able to burn right through all this and get wheeling
And its a good thing I am coming down this weekend cause my dumb ass had parts shipped to the house down there on accident.... once I get everything in hopefully ill be able to burn right through all this and get wheeling
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
Got a motor back in the jeep last night and bolted the aw4 up to it the clocking ring to attach the 300 to the aw4 is gonna show up today then ill smack that up there and see how much of my floor im gonna have to cut out to get this thing to fit.... but the aw4 fits pretty nicely and most of the stock connectors will work on it from the 32rh cause tjs and xjs apparently use all the same exact hookups for the drivetrain. ill post pictures tonight once the dana 300 is up.
So the current plan, get new trans and transfer case in the jeep and just build a Frankenstein motor out of assorted parts from the house for now then this winter build a motor to swap in next fall this way im only fighting the codes of one new system not two.. also should doing it this way should let me get some wheeling in this fall instead of having a broken rig sitting around.
So the current plan, get new trans and transfer case in the jeep and just build a Frankenstein motor out of assorted parts from the house for now then this winter build a motor to swap in next fall this way im only fighting the codes of one new system not two.. also should doing it this way should let me get some wheeling in this fall instead of having a broken rig sitting around.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Camo TJ
God sammit damn! We need pics! 
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
god meit damm here they are.
tucks up pretty nice and going to try and to get up a little more!!!!
tucks up pretty nice and going to try and to get up a little more!!!!
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
Managed to get a pretty decent deal on some sweet AL beadlocks today not gonna use them for a while till i can buy new tire but didnt wanna miss out. Got 4 ATX Chamber pro I, older forged beadlocks, and 2 walker evens not sure much about there. 2 of the ATX's are bent one is cracked but most likely repairable with a BFH and some welding.... ill post more pictures later here is the only one i got today.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
Progress has been slow but finally got the motor, trans and tcase all in the final spot now just gotta make some form of skid plate and trans mount.
Ran into some issues with the clocking ring due to the factor that i ordered a clocking ring not a flipping clocking ring but once i got that resolved things have been smooth.
Neat little trick to figure out driveshaft clearance i figured saw earlier on pirate, just tie strings to the yokes and hope your driveshaft isnt a larger OD than your yokes!!!
Ran into some issues with the clocking ring due to the factor that i ordered a clocking ring not a flipping clocking ring but once i got that resolved things have been smooth.
Neat little trick to figure out driveshaft clearance i figured saw earlier on pirate, just tie strings to the yokes and hope your driveshaft isnt a larger OD than your yokes!!!
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
PICTURES WILL BE UP LATER!!!!!!!!!!!!!!!!!!!!!!!!!
NOT WORTH READING WONT UNDERSTAND
so got a lot of work done recently but got a lot left to still make it to rausch, all the shifting setup is done, both twin shifters and the sidewinder shifter for the tranny, floor is all patched up, pretty much got to put everything else together and wire it all up and make driveshafts. motor is just getting rebuilt with random assorted parts we had laying around. tcase is getting a full rebuild, driveshafts I am planning to just cannibalize some of the driveshafts we have laying around. unfortunately been working around the house more than on the jeep recently but the first day of shop erection is on the 20th so had to bust our buts to clear all the land for it to get leveled this week.
NOT WORTH READING WONT UNDERSTAND
so got a lot of work done recently but got a lot left to still make it to rausch, all the shifting setup is done, both twin shifters and the sidewinder shifter for the tranny, floor is all patched up, pretty much got to put everything else together and wire it all up and make driveshafts. motor is just getting rebuilt with random assorted parts we had laying around. tcase is getting a full rebuild, driveshafts I am planning to just cannibalize some of the driveshafts we have laying around. unfortunately been working around the house more than on the jeep recently but the first day of shop erection is on the 20th so had to bust our buts to clear all the land for it to get leveled this week.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
wheelertaco
- Posts: 318
- Joined: Tue Oct 08, 2013 8:54 pm
- Location: Yorktown/Blacksburg
Re: Camo TJ
this build been dead lately, get your shit together 
"I am 110% winging it, and I have no idea what the fuck I'm doing." - Sam Paras
Godsamnit Dam
Godsamnit Dam
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
well ya see... ive been busy sitting on my ass doing nothing also known as building a 80x50 garage... plan to finish everything but driveshafts this weekend
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
wheelertaco
- Posts: 318
- Joined: Tue Oct 08, 2013 8:54 pm
- Location: Yorktown/Blacksburg
Re: Camo TJ
im waiting on some fire breathing dick draggin superchargin TJ action
"I am 110% winging it, and I have no idea what the fuck I'm doing." - Sam Paras
Godsamnit Dam
Godsamnit Dam
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
Back at it!!!
but dont worry while all the jeep was out i still found some good mud bogging time....
UPDATE: so everything is back in and ready to go just doing the finish work on the electrical and all that stuff...
tcase flip came out pretty well aint the prettiest thing but works good.
made a custom skid plate which cant really take pics of till i roll the jeep over.....
then all new shifter layout,
new ps cooler
replaced factory fuze box with two smaller blocks, the factory fuze block was only about half full and very bulky, making it nearly impossible to mount. Also added to the harness and wired up power for trans, fan, light bar, and 2 open blocks for now.
Everything will be wired into this switch panel on my dash.
will post more pictures not taken on a potato tonight when hopefully everything will be done but dshafts.
but dont worry while all the jeep was out i still found some good mud bogging time....
UPDATE: so everything is back in and ready to go just doing the finish work on the electrical and all that stuff...
tcase flip came out pretty well aint the prettiest thing but works good.
made a custom skid plate which cant really take pics of till i roll the jeep over.....
then all new shifter layout,
new ps cooler
replaced factory fuze box with two smaller blocks, the factory fuze block was only about half full and very bulky, making it nearly impossible to mount. Also added to the harness and wired up power for trans, fan, light bar, and 2 open blocks for now.
Everything will be wired into this switch panel on my dash.
will post more pictures not taken on a potato tonight when hopefully everything will be done but dshafts.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Camo TJ
Do you even have any of those lights?
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Camo TJ
nope im not wiring any lights actually, but you cant buy that panel without engraved switches and its only $50 so i figured i can live with my line locks being led light bar and side lights, and my fan being roof lights. the only one that will be accurate is the day i actually buy a light bar
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Camo TJ
hahah, nice. I'm glad you are not putting in a bunch of JF stuffredneckrapunzel wrote:nope im not wiring any lights actually, but you cant buy that panel without engraved switches and its only $50 so i figured i can live with my line locks being led light bar and side lights, and my fan being roof lights. the only one that will be accurate is the day i actually buy a light bar
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke