Metal Order
Moderator: Club Officers
- FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Metal Order
Did you get a donut shop?!?!?!
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
-
- Posts: 277
- Joined: Tue May 13, 2008 6:10 pm
- Location: Blacksburg, VA
- Contact:
Re: Metal Order
Yes my wife and I are opening a donut shop in Christiansburg sometime in January.FJCcrawler wrote:Did you get a donut shop?!?!?!
We'll be located at 1225 West Main Street (across from the Citgo gas station/delimart). It is on the right heading out of Christiansburg to I-81 in between Jack's Garage (the one with the biblical quotes) and M&M Tire. We'll have over 35 types of cake and yeast donuts and Mill Mt coffee. I'll bring some to the next meeting after we open.
1965 Mercedes Benz Unimog 404 w/ MB-A 7 ton PTO winch and crawler gears for 413:1 crawl ratio, LPG
1986 Chevrolet CUCV M1008 FOR SALE
1986 Chevrolet CUCV M1028 w/ snowplow and H1 rims and 37" tires FOR SALE
An original member of the SC4WDA.
1986 Chevrolet CUCV M1008 FOR SALE
1986 Chevrolet CUCV M1028 w/ snowplow and H1 rims and 37" tires FOR SALE
An original member of the SC4WDA.
- redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Metal Order
bump for brain.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
![:sheila:](./images/smilies/sheila.gif)
^ very true ^
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Metal Order
Brian,
Post up the itemized list of what you want. I need to order a fair bit of material too. They only deliver to commercial or industrial addresses, and since I don't have my shop anymore I was planning on having it delivered to the dock at my job.
Anyone else who is in need of steel, post up you itemized needs. I'll call next week for prices.
Post up the itemized list of what you want. I need to order a fair bit of material too. They only deliver to commercial or industrial addresses, and since I don't have my shop anymore I was planning on having it delivered to the dock at my job.
Anyone else who is in need of steel, post up you itemized needs. I'll call next week for prices.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Metal Order
I need some also. Some plate and also tube. The plate could be upwards of 400 lbs. Alec do you have a way to unload plate and reload it onto a trailer? I am sure it could be man handled but dont want to stick one person with an unload of a lot of steel.
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Metal Order
I will use a forktruck to load it up on my trailer at work. Unloading will just have to have to be me and you and your kids hahaalk1174 wrote:Alec do you have a way to unload plate and reload it onto a trailer? I am sure it could be man handled but dont want to stick one person with an unload of a lot of steel.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Metal Order
how much tube will i need for a rear bumper and sheet for rear corner guards/flush taillights?
TOPHER
08 JK
ME
"The only reason you run 20's on a vehicle is because you suck dick" - Alec
"I'd get kicked out of California in like a week" "you can't drive that here" "you can't be a faggot"- Sam
08 JK
ME
"The only reason you run 20's on a vehicle is because you suck dick" - Alec
"I'd get kicked out of California in like a week" "you can't drive that here" "you can't be a faggot"- Sam
- redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Metal Order
umm depends on what exactly you want... if you do a very basic design you could probably get away with a stick which is approx. 20' maybe a little more maybe a little less. But to be on the safe side I would probably order at least 2 then you can just use the extra elsewhere.
Also do you mean the style corner guard that wraps around your whole corner of the jeep? or just trying to protect the bottom of the corner? your going to have a very hard time forming a piece to the whole corner and as much as it sucks you prob just have to buy a premade one.
Also do you mean the style corner guard that wraps around your whole corner of the jeep? or just trying to protect the bottom of the corner? your going to have a very hard time forming a piece to the whole corner and as much as it sucks you prob just have to buy a premade one.
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
![:sheila:](./images/smilies/sheila.gif)
^ very true ^
Re: Metal Order
Bending a sheet would be a PITA. There's a couple companies that have prebent corner guards with tail light cut outs. Some of them do only fit with a couple styles of flare, so you'll need to find some that fit stock flares, or buy new ones.
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |
- FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Metal Order
Pricing for
-2" square tubing 1/8"wall
-2x4 rectangular tubing 3/16" wall
Possibly going nautical. Boatsides!![:sheila:](./images/smilies/sheila.gif)
-2" square tubing 1/8"wall
-2x4 rectangular tubing 3/16" wall
Possibly going nautical. Boatsides!
![:sheila:](./images/smilies/sheila.gif)
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
- BlueDodgeRam
- Posts: 1398
- Joined: Sat Aug 26, 2006 8:52 pm
- Location: Riner, VA
Re: Metal Order
Wait a minute, Chris, you're the donut guy? ![eek :eek:](./images/smilies/icon_eek.gif)
![eek :eek:](./images/smilies/icon_eek.gif)
Treehugger v2.0
'16 GMC Sierra Denali HD 3500SRW, Duramax
'07 WRF450F Supermoto
'16 GMC Sierra Denali HD 3500SRW, Duramax
'07 WRF450F Supermoto
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Metal Order
Lol, yeahBlueDodgeRam wrote:Wait a minute, Chris, you're the donut guy?
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Metal Order
Have yall made the order yet?
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Metal Order
Nope, no one has posted up what they want pricing on besides El Presidente.alk1174 wrote:Have yall made the order yet?
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Metal Order
I have quite a few things if you think we can get them unloaded and into my trailer. I can run to Roanoke to get the plate if need be. But dont think I can get the round tube from Roanoke, at least not at a decent price.
Need about 200' of the cheapest 1-1/2 round tube. Thinking 1-1/2 .065 wall HREW
1 stick of 1-3/4 .120 wall HREW
2x2 .120 square 2 sticks
1/8 X 4 X 8 cold rolled plate
1/4 X 4 X 8 Cold Rolled plate
Need about 200' of the cheapest 1-1/2 round tube. Thinking 1-1/2 .065 wall HREW
1 stick of 1-3/4 .120 wall HREW
2x2 .120 square 2 sticks
1/8 X 4 X 8 cold rolled plate
1/4 X 4 X 8 Cold Rolled plate