Page 12 of 14
Posted: Thu May 05, 2011 7:52 am
by Arya Ebrahimi
shmoken875 wrote:Jwlman wrote:willhf1011 wrote:James what is your vertical separation at the frame and axle? It looks like you will be running with a ton of anti-squat. I'm sure you've run the numbers, I'm just curious because I ran into the same issue with my rig and fitting uppers beneath the floor.
About 4 inches at the frame and 6 at the axle. I have it about 76% anti-squat. I am going to move the upper link mounts up and reward some which will drastically drop my anti-squat. Meaning I will either need to move the frame side lower links up or the axle side down below the center of the tube.
wtf is anti-squat? or is that a dumb question?
You're clearly not a Pirate regular. That's all those link suspension guys talk about...anti-squat, roll center, roll axis blah blah blah
Posted: Thu May 05, 2011 8:07 am
by Jwlman
willhf1011 wrote:If you're going to do something to counteract that adjustment I would look at moving the axle side upper up a bit unless there's a really good reason not to. Extra separation at the axle is never a bad thing in terms of strength
That does appear to be the way to go. I spent a lot of time making those tabs contour to the housing
Posted: Sun Sep 18, 2011 1:10 pm
by Jwlman
Posted: Mon Sep 19, 2011 4:42 pm
by BadnewsCJ
Jwlman wrote:Occasionally this thing still gets worked on
Wish I could say the same about my rig
Posted: Tue Sep 27, 2011 7:22 pm
by Jwlman
Posted: Tue Sep 27, 2011 10:07 pm
by shmoken875
Jwlman wrote:
beef
Posted: Mon Oct 03, 2011 2:02 pm
by Jwlman
Close to ride height. Going to have 6" up and 10" down
Re: James's 88 Yj
Posted: Wed Apr 11, 2012 7:00 pm
by Jwlman
Re: James's 88 Yj
Posted: Wed Apr 11, 2012 7:10 pm
by jstables
^^^ looking good
Re: James's 88 Yj
Posted: Wed Apr 11, 2012 7:13 pm
by BadnewsCJ
June 29th completion date?????
And speaking of which, is there a thread on here about the RCQ? You going to that?
Re: James's 88 Yj
Posted: Wed Apr 11, 2012 7:25 pm
by Jwlman
BadnewsCJ wrote:June 29th completion date?????
And speaking of which, is there a thread on here about the RCQ? You going to that?
June 29th 2013 expected completion
When is the RCQ this year?
Re: James's 88 Yj
Posted: Wed Apr 11, 2012 10:36 pm
by Matt612
Looking good... I would kill for a shop like that and a deal like you got on those iroks
Re: James's 88 Yj
Posted: Thu Apr 12, 2012 8:51 am
by BadAssEddie
Sexy Pants!
I'll call you next time I'm home and come wrench with you
Re: James's 88 Yj
Posted: Thu Apr 12, 2012 12:46 pm
by BadnewsCJ
Jwlman wrote:BadnewsCJ wrote:June 29th completion date?????
And speaking of which, is there a thread on here about the RCQ? You going to that?
June 29th 2013 expected completion
When is the RCQ this year?
June 2nd and 3rd
Re: James's 88 Yj
Posted: Thu Apr 12, 2012 4:29 pm
by Jwlman
BadnewsCJ wrote:
June 2nd and 3rd
Won't make it. I am going to be in Alabama racing superbikes that weekend
