Re: 2 door xj build
Posted: Mon Jan 07, 2013 10:14 am
You're doing a real great job with this XJ man, I am impressed.
Sinking Creek 4WD Association
Off-Roading In The New River Valley
http://sc4wda.org/forums/
2 door xj build
Page 12 of 13
Re: 2 door xj build
Posted: Mon Jan 07, 2013 1:15 pm
Dope, those fenders are badass bro
Re: 2 door xj build
Posted: Mon Jan 07, 2013 6:00 pm
Tube fenders look great man.
Re: 2 door xj build
Posted: Mon Jan 07, 2013 8:39 pm
Looks good dude....
What ended up being the problem with keeping it running?
What ended up being the problem with keeping it running?
Re: 2 door xj build
Posted: Mon Jan 07, 2013 9:22 pm
Crank sensor
Re: 2 door xj build
Posted: Tue Jan 08, 2013 9:16 am
Couldn't have done the tube fenders without Wills help and Nicks bender, but Im really happy with how they came out, still need to finish welding them and then paint them.
Re: 2 door xj build
Posted: Thu Jan 10, 2013 1:15 am
naturally, lolwillhf1011 wrote:Crank sensor
Re: 2 door xj build
Posted: Sun Jan 13, 2013 2:07 pm
Finally finished welding the body to the rear tube fenders.. it was good practice for me. Most of the welds look terrible but there was some healthy gaps I had to fill. Painted them as well. Also while welding I managed to catch the inside of my jeep of fire... luckily my dad walked out side and told me haha here are a few pics..
Re: 2 door xj build
Posted: Mon Jan 14, 2013 12:08 pm
LOL, I caught my Bronco on fire when I was welding the body to the rockers too.
That shit is tough. All of my welds on the body look like shit too.
That shit is tough. All of my welds on the body look like shit too.
Re: 2 door xj build
Posted: Fri Jan 25, 2013 7:13 pm
x2Lil Whitey wrote:naturally, lolwillhf1011 wrote:Crank sensor
Lookin sweet man!
Re: 2 door xj build
Posted: Fri Mar 01, 2013 3:13 pm
Finally cleaned the mouse nest out of my blower motor... poor mouse was stuck in the fan..
Ripped out the rest of the carpet.. hopefully I might have a cage in time for Windrock and 1 prp seat installed
Used Prp I picked up over break..
Ripped out the rest of the carpet.. hopefully I might have a cage in time for Windrock and 1 prp seat installed
Used Prp I picked up over break..
Re: 2 door xj build
Posted: Fri Mar 01, 2013 3:24 pm
nice dude!
Re: 2 door xj build
Posted: Fri Mar 01, 2013 5:18 pm
Do your cage this weekend 
Re: 2 door xj build
Posted: Fri Mar 01, 2013 6:02 pm
I'm going to try to start Sunday, I have to work tomorrowBadAssEddie wrote:Do your cage this weekend
Re: 2 door xj build
Posted: Mon Mar 04, 2013 10:37 am
Small update:
Remove my center console so now the interior is really stripped down and built all my cage tie ins. So Im ready to start bending tube. My plan is A to C, A pillar will land on 2x2 that goes from my rockers to frame and rear C pillar will tie into the rear bumper. Hopefully I will get some stuff done this week other wise I will bolt my stock seat back in for Windrock.
Cage tie ins.. Rear Hard to tell from the picture but it will pass through that hole then hit the bumper at an angle. It should work pretty well I hope
Front..
Remove my center console so now the interior is really stripped down and built all my cage tie ins. So Im ready to start bending tube. My plan is A to C, A pillar will land on 2x2 that goes from my rockers to frame and rear C pillar will tie into the rear bumper. Hopefully I will get some stuff done this week other wise I will bolt my stock seat back in for Windrock.
Cage tie ins.. Rear Hard to tell from the picture but it will pass through that hole then hit the bumper at an angle. It should work pretty well I hope
Front..