found this when I was driving home this weekend

Post by **BlueDodgeRam** » Tue Apr 03, 2007 7:51 pm

buy these, only 300 bucks a piece

Lukipela · Post by **Lukipela** » Tue Apr 03, 2007 7:52 pm

um no!!!

Post by **hssss** » Tue Apr 03, 2007 7:54 pm

Do you have no bump stops. I have an XJ that is about to be crushed that probably has a set on it. I also have some YJ 3" body lifts that I turned into 1 set of 1" and 1 set of 2".
________
VAPORIZER AFFILIATE

Lukipela · Post by **Lukipela** » Tue Apr 03, 2007 8:13 pm

It has the stock bumpstops. I just finished buying the bumpstops that I need from Rustys Off Road, so the problem will be fixed in about a week.

Post by **hssss** » Tue Apr 03, 2007 9:07 pm

good call.
________
Easy vape vaporizer

Lukipela · Post by **Lukipela** » Mon Apr 09, 2007 11:58 pm

Hey Randy you got any free time soon to help put my bump stops in? I need a way to unload the coil so that I can reach inside it to swap the bump stops.

Post by **BlueDodgeRam** » Tue Apr 10, 2007 12:00 am

hi-lift

Lukipela · Post by **Lukipela** » Tue Apr 10, 2007 12:03 am

BlueDodgeRam wrote:hi-lift

I don't have one.

Post by **shmoken875** » Tue Apr 10, 2007 12:03 am

Lukipela wrote:Hey Randy you got any free time soon to help put my bump stops in? I need a way to unload the coil so that I can reach inside it to swap the bump stops.

you can use my tools, but all man power here is goin into getting the new door on the cage and locker in this weekend, the next weekend is all studying, the next is big dogs, and the next is finals

Lukipela · Post by **Lukipela** » Tue Apr 10, 2007 12:04 am

shmoken875 wrote:
Lukipela wrote:Hey Randy you got any free time soon to help put my bump stops in? I need a way to unload the coil so that I can reach inside it to swap the bump stops.
you can use my tools, but all man power here is goin into getting the new door on the cage and locker in this weekend, the next weekend is all studying, the next is big dogs, and the next is finals

Do you have a hi-lift jack? If so could I use it this weekend and I could help you with your cage or locker.

Post by **shmoken875** » Tue Apr 10, 2007 8:15 am

Lukipela wrote:
shmoken875 wrote:
Lukipela wrote:Hey Randy you got any free time soon to help put my bump stops in? I need a way to unload the coil so that I can reach inside it to swap the bump stops.
you can use my tools, but all man power here is goin into getting the new door on the cage and locker in this weekend, the next weekend is all studying, the next is big dogs, and the next is finals
Do you have a hi-lift jack? If so could I use it this weekend and I could help you with your cage or locker.

yea you can use it

Post by **jonesy** » Tue Apr 10, 2007 10:33 am

Lukipela wrote:
shmoken875 wrote:
Lukipela wrote:Hey Randy you got any free time soon to help put my bump stops in? I need a way to unload the coil so that I can reach inside it to swap the bump stops.
you can use my tools, but all man power here is goin into getting the new door on the cage and locker in this weekend, the next weekend is all studying, the next is big dogs, and the next is finals
Do you have a hi-lift jack? If so could I use it this weekend and I could help you with your cage or locker.

i might be able to make you a deal .... depending on when i get back saturday from home, i can help you put in your new bumpstops if you help me put the ZJ coils in the rear .... huh ... huh .... whaddya say?

Lukipela · Post by **Lukipela** » Tue Apr 10, 2007 12:22 pm

affende wrote: i might be able to make you a deal .... depending on when i get back saturday from home, i can help you put in your new bumpstops if you help me put the ZJ coils in the rear .... huh ... huh .... whaddya say?

Can I use your angle grinder to trim my finders? If so then you got yourself a deal.

Post by **jonesy** » Tue Apr 10, 2007 12:59 pm

Lukipela · Post by **Lukipela** » Tue Apr 10, 2007 1:32 pm

Sweet, just let me know when you get back sat.