HP Dana 44 from 1979 f150 **complete** and 5.13's
Posted: Wed Jun 20, 2007 2:08 am
I've got a complete axle from a '79 f150. It has already been completely dismantled and cleaned! I was going to do a SAS on a truck I have, but plans have changed. I've got the complete housing, coil buckets, radius arms, radius arm mounts, steering arms, complete outers...everything. Its got the 3.50 gears, but I have the low gear carrier that I might be willing to part with.
This 44 has new shaft seals already installed.
Axle and all other parts: $350
With the low gear carrier:$400
Yukon 5.13 gears (for the 44 and a 9in)
Fronts $250 (with master install kit)
Rears: $300 (with master install kit)
Both front and rear: $475 (with master install kits)
All prices are before shipping and are OBO. Any reasonable offer accepted.
Delivery available for a reasonable distance.
This 44 has new shaft seals already installed.
Axle and all other parts: $350
With the low gear carrier:$400
Yukon 5.13 gears (for the 44 and a 9in)
Fronts $250 (with master install kit)
Rears: $300 (with master install kit)
Both front and rear: $475 (with master install kits)
All prices are before shipping and are OBO. Any reasonable offer accepted.
Delivery available for a reasonable distance.