SAS Question

Post by **JCaldwell** » Tue Sep 11, 2007 9:29 am

Im getting ready to SAS my 88 Yoyo and was wonder if anybody can give me some ideas..I want to run 36"s on it and wondering what gears I should run!! I want a good road gear with power and gas milage!! I am also looking for a set or a kit for the front spring hangers any ideas?

Post by **MtnToys** » Tue Sep 11, 2007 10:42 am

5.29 gears

Are you looking for a complete lift kit with hysteer and all? Or just front spring hanger? Marlin crawler, sky manufacturing, trail gear, all pro off road, front range off road. There all pretty much the same.

Post by **alk1174** » Tue Sep 11, 2007 11:45 am

I will second the 5:29s it brought my truck back to as close to stock as possible the speedo is now correct and I can use 5th again. I would not put gears in the axles for inprovement on the trail because they did not help there but they were worth it for the road. I can get 17mpg on the interstate loaded with gear a spare on the roof and an untouched 25 year old carb feeding the squirrels should easily get 20+ unloaded and with the carb rebuilt

Post by **alk1174** » Wed Sep 12, 2007 6:15 pm

http://www.grimmjeeper.com/gears.html

Here is a good gear calculator.

Post by **JCaldwell** » Fri Sep 14, 2007 9:26 am

Thanks ya..No I want looking to put Hi-Steer on it wont need it Its pretty much my DD but when I SAS I will play alittle more...

I think I'm going to make most of my parts like the shock hoops and hangers...

Post by **MtnToys** » Fri Sep 14, 2007 10:11 am

Push pull steering sucks (even for DD). I hope if your not doing hysteer you at least do cross over steering. You already have the ifs steering box.

Post by **Arya Ebrahimi** » Fri Sep 14, 2007 10:28 am

It's so cheap to buy shock towers, I don't think I would even think about building them, even though I have a bender, notcher, and the tube. If you don't want to do the hoop style, you can use the ford tower style.

Ary

Post by **Yoda** » Sat Sep 15, 2007 8:35 am

Arya Ebrahimi wrote:It's so cheap to buy shock towers, I don't think I would even think about building them, even though I have a bender, notcher, and the tube. If you don't want to do the hoop style, you can use the boobie tower style.

Ary

yea i mean shell out 50 bucks for a set of shock hoops. if you go with a marlin kit or something all the bracketry you need should come with. And high steer i would say is a must, those tires will fight you through turns other wise.

Post by **Arya Ebrahimi** » Sat Sep 15, 2007 10:33 am

God damnit Cody