Page 1 of 1

Cj Jeep Parts For Sale Trade For Toyota Parts

Posted: Sun May 18, 2008 11:26 pm
by direkt
Here's whats for sale:

'83 D30 Wide Track, New wheel bearings/races, one new hub, factory
Jeep lockouts (one cracked ear and one missing a snap ring) lockouts
are cleaned and NOT packed full of grease, new wheel seals, new
calipers and brake pads, 2.73 gears, new pinion seal, new wheel
bearing nuts, cleaned and painted. Also comes with 3.73 gears not
installed and axle nut socket. $200

'83 M20 Wide Track, 2.73 gears, drum brake, good shoes and drums,
Mostly cleaned and painted (brake backing plates not painted), axle
comes with NIB spring kit, other than that condition unknown $100

'77 T-150/D20 Combo, cleaned/painted, Both shift into gear/ low range
easily and turn freely by hand condition unknown. I have not opened
the case. $125 OBO

'83 T4, shifts and turns freely by hand, condition unknown, $80 OBO

'77 232, turns freely by hand, condition unknown $50 OBO

'83 258, turns freely by hand, condition unknown $100 OBO

'83 bellhousing for T4 $50 OBO

'77 grill shell $100 OBO

'77 windshield frame with good glass $150 OBO

'77 CJ5 rear and 83' CJ7 front springs, have new poly bushings
installed, $100 OBO

'77 CJ5 Firewall, decent condition, have an '83 title to go with this
firewall $200 OBO

3- 5 on 5.5 wheels and 1 bent one, have 235/75 rollers on them, mostly
white $75 OBO

Steering colums, steering wheels, factory roll cage, wiring
harnesses, gauges, seats, radiator and other items as well. No sheet
metal other than firewall and grill. Haynes repair manual for this
vintage of Jeep.

Selling the Jeep project to persue the Toyota project. It's in a
little better shape.
Looking for Toyota 8" 5.29 gearsets for front and rear. Also looking for solid front axle to do a swap onto an '87 factory IFS truck. Will trade Jeep for Toyota parts. I also travel to North Carolina quite often so if you are between Blacksburg VA and Greensboro NC we can work someting out shipping wise.
E-mail is best way to contact direkt@triad.rr.com
I have 8 weeks to sell this stuff then.........?

Posted: Mon Jun 02, 2008 11:27 am
by direkt
Sold the frame

Hey guys where else can I post this stuff? PM me any ideas.

Thanks

post

Posted: Mon Jun 02, 2008 10:40 pm
by ford150
craigslist or nrvnews.com

Posted: Wed Jun 04, 2008 6:47 am
by shmoken875
I saw a toy solid front for sale on pirate yesterday that was in NC, iirc it was like $200

Posted: Wed Jun 04, 2008 7:10 am
by alk1174
D&M has 2 SFA toys. One has had the hubs stripped off though. Dont know about price.

Posted: Wed Jun 04, 2008 8:03 am
by hklvette
If you want a complete SFA toy, their was (possibly still is, will look today) a blue one for sale on radford road down the street from the dodge dealer.

Posted: Wed Jun 04, 2008 8:17 am
by MtnToys
alk1174 wrote:D&M has 2 SFA toys. One has had the hubs stripped off though. Dont know about price.
If you pick up the axle missing hubs, I have a pair of hubs I'll sell.

Posted: Wed Jun 04, 2008 9:11 pm
by rujeeper11
you could post on novajeepers.com. most of those guys would travel for parts

Posted: Thu Jun 05, 2008 5:34 pm
by direkt
Wow thats a lot to take in all at once.

I saw and called the guy about the axle in NC. $200 for just the front from an '84

I also went and looked at the D&M trucks he wants $300 for just the front axle.

I don't want a complete truck if I can help it. I would like to SAS the one that I have. It runs great and it has a family history.

I will post what I have left on novajeepers.com. thanks for the idea.

Posted: Mon Jun 30, 2008 10:26 am
by shmoken875
direkt wrote:Wow thats a lot to take in all at once.

I saw and called the guy about the axle in NC. $200 for just the front from an '84

I also went and looked at the D&M trucks he wants $300 for just the front axle.

I don't want a complete truck if I can help it. I would like to SAS the one that I have. It runs great and it has a family history.

I will post what I have left on novajeepers.com. thanks for the idea.
http://www.pirate4x4.com/forum/showthread.php?t=695521
'82 front I believe hub to hub $100 Northern SC

Posted: Mon Jun 30, 2008 10:57 am
by Arya Ebrahimi
FYI 84 and 85 are slightly better because they have additional gusseting on the housings from the factory. It's not a huge deal, as the gussets can be added, but just something to think about.

Ary

Posted: Mon Jun 30, 2008 6:05 pm
by Stinson
If I were to do it again, I wouldnt hesitate to snag a 83 axle. I would just run a truss on the top. If its going to bend its going to happen at the knuckle balls, so why not run the housing with more clearance underneath...

jeep parts

Posted: Tue Aug 19, 2008 10:22 pm
by jeeperofva
put ur parts on here and see what happens. nice web site plenty of members.


http://www.jeepsunlimited.com/forums/index.php

Posted: Wed Aug 20, 2008 10:48 am
by TerryD
99% of this stuff took a trip to the scrap yard last month...