Sinking Creek 4WD Association

Posted: **Fri Jan 02, 2009 10:13 pm**

Stuff not pictured
2 4runner inclimeter and altimeter gauges
2-3â€

Posted: **Sat Jan 03, 2009 11:47 am**

matt, get stinson to cross post this on md creepers, you'll probly get alot more business there. Craigslist is pretty good too.

Posted: **Sat Jan 03, 2009 11:56 am**

on second thought ... you are not a hippy .. you are a gypsy.

im really cheesed off at how much crap you have.

Ohio State, Son!

Posted: **Sun Jan 04, 2009 3:07 am**

Is there anyway that I might be able to come and check out what parts you have? I am looking for several things including some bucket seats in good condition. I am also interested in the hedders.Let me know.

Posted: **Mon Jan 05, 2009 12:07 am**

Everything is located right over the Maryland line in Felton PA. It would be quite a haul for you to take a look but your more than welcome to. If you want me to bring stuff down to Blacksburg let me know before Jan. 14th.

Posted: **Mon Jan 05, 2009 1:25 am**

Here is what I am looking for...

Things I saw in the pictures I definitely want
Your best pair of bucket seats,
The 4cylinder header (not the stock one),
4" front springs,
and IFS steering box?

Things I didn't see in pics but you might have
coolant overflow container,
washer fluid container,
5 speed shifter knob.

I am sure I will think of more but that is it at the moment. Let me know how much you want for all this stuff. I wish I was closer I would come up with my trailer and get all kinds of stuff. All this is for the budget mobile.

Posted: **Mon Jan 05, 2009 2:16 pm**

Matt
If you have a taillight harness I will take it. I am looking for both the male and female ends and both the pass and driver side.
Adam

Posted: **Tue Jan 06, 2009 12:28 am**

Fizboy, pm sent.

Krantz, I can get you the harness from a 4runner. You would have to pull the rear window and wiper wires out of the driver side. Would this work for you? Where are you going to mate this to your trucks harness?

Posted: **Tue Jan 06, 2009 9:24 am**

How much 4 the front springs?

Posted: **Tue Jan 06, 2009 9:44 am**

How much for all 4 AllPro springs?

Also looking for a solid front you have laying around anywhere? I never saw a front housing?

Posted: **Tue Jan 06, 2009 10:05 am**

Fizboy is gona buy the front alpro springs. Do you want just the rears?
I have a solid front axle but theirs a possibility the housings bent. Its been through alot. I have everything else for a soild front axle but birfs.

Posted: **Tue Jan 06, 2009 10:08 am**

Eh, dont want to take a chance on a bent housing, I'm more interested in buying a complete axle than parts.

How much for just the rears?

Posted: **Tue Jan 06, 2009 11:12 am**

JCook5003 wrote:Eh, dont want to take a chance on a bent housing, I'm more interested in buying a complete axle than parts.

How much for just the rears?

Pm sent

Posted: **Tue Jan 06, 2009 6:16 pm**

MtnToys wrote:Fizboy, pm sent.

Krantz, I can get you the harness from a 4runner. You would have to pull the rear window and wiper wires out of the driver side. Would this work for you? Where are you going to mate this to your trucks harness?

Matt
I am hoping the plugs match the first gen to make a harness to hook to my lights if I ever have to flat tow it. Let me know how much you want.

Posted: **Wed Jan 07, 2009 9:30 am**

JCook I have a front that I'd let go

Sinking Creek 4WD Association

Shit tons of Toyota parts Pickup 4runner and FJ60

Shit tons of Toyota parts Pickup 4runner and FJ60