Sinking Creek 4WD Association

Need to weld a few joints (6 fittings) of 3/4" threaded black pipe to keep them from twisting...if someone has a welder I can use, I'm competent enough to glob weld onto a joint that only has to resist some twisting...if you want to weld it with some actual skill behind the stinger, all the better.

Anyone help?

I can weld it for ya if u want to drive to Pulaski !!

chuck

I took it home this past weekend and welded it, but I usually count on my neighbors O/A rig and he was out of town, so I now need to borrow a torch to heat the hell out of two pieces of pipe and beat them each flat at one end...anyone?