Transmission Shops?

Wrenching and Technical Information

Moderator: Club Officers

Post Reply
User avatar
Bacwds
Posts: 108
Joined: Mon Sep 01, 2014 9:38 pm

Transmission Shops?

Post by Bacwds »

Any reputable transmission shops in the blacksburg area? 3rd gear is going out and im torn between having it rebuilt or just buying a new "performance" one thats supposed to have a heavier duty 3rd gear for my truck. Wanted to get some estimates on rebuild before i do anything
User avatar
turnbull
Posts: 295
Joined: Fri Feb 01, 2013 10:32 pm

Re: Transmission Shops?

Post by turnbull »

I had Auto Master Tire and Service replace my clutch. They also noticed the bell housing was cracked, so they welded that up as well. I have always liked their service. They also offer a 10% discount on tranny service if you are a new customer.
'15 JK Sport w/ 31.5" Duratracs, 3.6l Pentastar, 6-speed manual, 4.10 gears, Detroit TrueTracs front and rear
User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: Transmission Shops?

Post by BadAssEddie »

If you are not going to do the rebuild yourself, it is going to be very expensive either way. If you buy a new crate tranny, you can at least install yourself to save money. You should also have less downtime. If you have yours rebuilt, it will probably be cheaper overall but take longer and what's $500 when you are spending a couple thousand. I have never had experience with a shop doing a transmission rebuild because the only time I've had one go out, I rebuilt it myself. Make sure you know that the guy who's doing it knows what he's doing. It's not like replacing a clutch, at all.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
User avatar
Bacwds
Posts: 108
Joined: Mon Sep 01, 2014 9:38 pm

Re: Transmission Shops?

Post by Bacwds »

Yea ive always been leary of shops rebuilding transmissions, i personally would like to rebuild it myself but i dont see how it will be possible between having no clue at all of what im doing, no real good place to do it, and dont have any of the tools to do it with..... im gonna do a drain and refill on the transmission pan and add lucas auto transmission fix tomorrow and hope that helps/fixes it......
Post Reply