Sinking Creek 4WD Association

Recently decided that I wanted to build a cage over winter break and need some more metal to do so, probably won't place the order till after thanksgiving.

Sam - 4 stick 1.75 DOM x.12

hmmm cage party at sams place over winter break?! I need to find some poo poo pipe to build my exo

I'm in for a stick of the same.

Grubb 1 stick 1.75 .120 DOM

I would be down for half a sheet of 3/16, been thinking about building a bumper.

Grubb, are you going to use the whole stick?

Nope, I'll probably use 12-14 ft max. I'll split a sheet of 3/16 with you

1 stick of 1.75 x.120 wall

Do we have access to a bender?

not really

I took mine to an exhaust shop and got it bent at 45 degrees for my sliders

VT-05WK wrote:I took mine to an exhaust shop and got it bent at 45 degrees for my sliders

Is there a place in bburg that will bend tube?

I didn't find anyone with an actual bender when I was looking. Pretty much any exhaust shop will be able to do it

LIST UPDATE: Metal Order #2
Sam - 4 stick 1.75 x.120wall DOM
Grubb- 1 stick 1.75 x.120 wall DOM, 4x4 3/16 plate
Patrick H. -4x4 3/16 plate
Alec- 1 stick 1.75 x.120wall DOM
Wong- 1 stick 2x4 3/16 wall ERW, 1 stick 2x2 .120 wall ERW

Here's the pricing for most of it. It should be pretty up to date given that this was from a month ago. Kev, can you could get a price on the 2x4 3/16wall ERW?

4x8 sheets of 3/16 are $100 a piece
1.75 .120 wall DOM - $3.22 per foot
1.75 .095 HREW -$1.30 per foot
2x2 .120 Square ERW is $44 for 24 ft piece
1.5 .120 wall DOM - $2.85 per foot
1.5 .120 wall HREW-$2.18 per foot and its a 24ft piece
1.5 .25 wall DOM - $5 per foot
2x4 .120 wall Square ERW - $4.66 per foot

when i get back monday ill call on prices

Will you price me a Schedule 80 pipe 30' long? I need it for the base (pole) of my sign. The sign below has 2 sides and is 7'x7'.
Thank you in advance!