Sinking Creek 4WD Association

got a bunch of stuff for sale... not all has prices yet will post prices later today but feel free to make offers. Everything has 1310 yokes on them. Pictures upon request to much stuff to post pictures of it all

1 32rh trans - works flawlessly 115k miles - leaks like a siv but new pan gasket would fix that! - $550
1 np231 with sye kit (2.7 gears not 4.0) $350
1 np231 without sye (2.7 gears not 4.0) $250
1 TJ rear tom woods driveshaft double cardon driveshaft approx. 19" long - $150
1 TJ stock front driveshaft double cardon. will post measurements later. - $100
1 hp dana 30 with clayton 3 link mounts welded on - $200
1 dana 30 reverse cut 3.73 gear set - $100 (5k mile on them)
1 dana 35 with clayton 4 link mounts welded on 3.07 gears open carrier - $50
1 bare 8.8 with 3.73s and working limited slip - $250 - can weld on stock tj brackets if someone wants them and pays for it
1 stock set of dana 30 shafts - $75
1 stock XJ intake manifold (4.0)
1 stock XJ radiator
1 stock TJ master cylinder - $20
2 Clayton lift track bar - solid bushing on one side and johnny joint on the other
2 jeep/dodge drop pitman arms i believe one is 3" one is 4"

What are the 231s out of?

they are both out of jeeps should be identical, the one with the sye is from my TJ and the one without is from my brothers XJ