Page 1 of 1
Plasma Cut SC4WDA logo
Posted: Thu Apr 27, 2017 4:13 pm
by YellowDodgeBrian
Are we still making the plasma cut logos? I thought I saw something a while ago about someone making a CAD file of our logo so it could be uploaded to a CNC machine. If so I'd be intrested.
Re: Plasma Cut SC4WDA logo
Posted: Fri Apr 28, 2017 9:55 am
by redneckrapunzel
I haven't had time recently to create a dxf of the logo but once time free's up I might try to. If someone else wants to make and send it to me that would be awesome and you might get one for free.99. Just make sure you make it a reasonable size like 8-10" diameter. Also if anyone has any DXF files or machine code of cool stuff feel free to upload them. I think I heard there was a design for a quick release fire extinguisher floating around a while back.
Re: Plasma Cut SC4WDA logo
Posted: Fri Apr 28, 2017 12:05 pm
by YellowDodgeBrian
Here is the DXF! Some minor changes had to be made.
Re: Plasma Cut SC4WDA logo
Posted: Fri Apr 28, 2017 12:15 pm
by BadAssEddie
redneckrapunzel wrote: ↑Fri Apr 28, 2017 9:55 am
I haven't had time recently to create a dxf of the logo but once time free's up I might try to. If someone else wants to make and send it to me that would be awesome and you might get one for free.99. Just make sure you make it a reasonable size like 8-10" diameter. Also if anyone has any DXF files or machine code of cool stuff feel free to upload them. I think I heard there was a design for a quick release fire extinguisher floating around a while back.
Just looked through the old threads. Nothing but an Inventor screen snip. I will ask Will and Ary if they still have the files for those and the stripper gussets.
viewtopic.php?f=3&t=4455&start=30
viewtopic.php?f=3&t=4456&p=40370#p40370
Re: Plasma Cut SC4WDA logo
Posted: Mon May 01, 2017 10:26 am
by hoveyg
YellowDodgeBrian wrote: ↑Fri Apr 28, 2017 12:05 pm
Here is the DXF! Some minor changes had to be made.
Love the changes. Really made it look clean and well made
Re: Plasma Cut SC4WDA logo
Posted: Mon Dec 11, 2017 1:14 pm
by Mr.WJ
Sam, cut these out on your plasma table!
Re: Plasma Cut SC4WDA logo
Posted: Mon Dec 11, 2017 2:33 pm
by redneckrapunzel
post dxf or g code ill make. Also have an engraver
Re: Plasma Cut SC4WDA logo
Posted: Tue Dec 12, 2017 9:24 am
by Mr.WJ
Brian, do that or send me your pictures and I'll convert to .dxf or whatever
Re: Plasma Cut SC4WDA logo
Posted: Fri Dec 15, 2017 7:02 pm
by YellowDodgeBrian
Mr.WJ wrote: ↑Tue Dec 12, 2017 9:24 am
Brian, do that or send me your pictures and I'll convert to .dxf or whatever
Which pictures do you mean? I just meant our Logo, the picture should be up on the forum somewhere.
Re: Plasma Cut SC4WDA logo
Posted: Mon Dec 18, 2017 7:41 am
by Mr.WJ
The one that is posted above, "DFX made" but can't be seen (on my work pc) because of Photobucket.
Re: Plasma Cut SC4WDA logo
Posted: Wed Dec 20, 2017 4:26 am
by YellowDodgeBrian
Mr.WJ wrote: ↑Mon Dec 18, 2017 7:41 am
The one that is posted above, "DFX made" but can't be seen (on my work pc) because of Photobucket.
oh no haha, that was a joke where I crudely used paint and photo shopped patches over the old logo. I don't believe any DFX has been made for it.
Re: Plasma Cut SC4WDA logo
Posted: Wed Dec 20, 2017 7:45 am
by Mr.WJ
Well damn.
Re: Plasma Cut SC4WDA logo
Posted: Mon Jan 01, 2018 4:57 pm
by BlueDodgeRam
I have the stripper pole gusset files that I can send to whoever in Inventor and 2D dxf. They look like this
Re: Plasma Cut SC4WDA logo
Posted: Wed Jan 03, 2018 10:26 am
by redneckrapunzel
Could you send me the 2d dxf for that?
Spcall94@vt.edu
Re: Plasma Cut SC4WDA logo
Posted: Sat Jan 06, 2018 12:12 pm
by YellowDodgeBrian
I think that patches needs these.
