Page 1 of 1
Need some 3.5x3.5 square tube....
Posted: Sat Feb 03, 2007 11:37 pm
by Stinson
All I need is a 5-8inch long piece of 3.5x3.5 1/4 inch thick would be best. If any one has any laying around let me know how much you want for it. I have my gas tank out right now doing some frame repair and installing a new tank so I figure it would be best to weld new hangers on for the longer springs I am installing Thanks Stinson
Posted: Mon Feb 05, 2007 1:27 pm
by MILLER
sky makes a nice hanger for the 63" chevy spring swap they sell it as a kit but I think they will sell it seperately.
Also, there is a way to weld the hanger on if you have the gas tank on the vehicle. It is still better to weld on the hanger with it off. Drill three or four holes, 9/16 works well, on the top inside of the hanger. This will take place of the bead that would be placed if the gas tank was not in the way. Just make sure you get a good weld to the frame and dont just fill the hole. and do a good job around the edges of the hanger you can get to.
Posted: Mon Feb 05, 2007 8:02 pm
by Stinson
Thats why I was trying to find the metal.....Ive got the tank out right now cause I am patching the frame and replacing the tank. Anywhere around to buy steel? Thanks
Posted: Mon Feb 05, 2007 8:47 pm
by yotacowboy
seacrh around on the board, there's quite a few places to but steel local, but they all tend not to like selling small quantities. also, miller's got a line on a bunch of steel if you don't mind waiting. pm him.
Posted: Mon Feb 05, 2007 8:55 pm
by hklvette
Stinson, I'll look tomorrow at work and see if i can't get you some of what you're looking for.
Posted: Mon Feb 05, 2007 9:26 pm
by Stinson
Thanks, I guess Ill make some phone calls in the morning to see if I can get that small of a piece locally.