More stuff.. Coming to Bburg soon!

Post by **Billet Benny** » Sun May 18, 2008 9:42 am

I've got more stuff up for sale. I'm heading to Bburg sometime in the next couple weeks and can haul most anything.

Look at photos of the buggy.. It is now cut up. If you see some part of the tube sections you would like, for scrap or otherwise, tell me and you can get it cheap. If you want any part of the frame say so too. I plan to make a small welding table out of it and haul the rest to the scrap yard.

Have ubolt plates and ubolts for bolting in a 14 bolt FF and a Dana 60 front. $20 for each set. Most ubolts were new and never used in a running truck.

Tuff Country EZ ride springs for front of a Chevy. 3 or 4" of lift. $125

Good shape 63" Chevy leafs.. $60

2 Toyota Roller wheels and tires.. $10

Toyota pickup center console thingy. $5

Small pile of strip steel and 2 pieces of angle iron. $20 for the lot.

Any short pieces of straight or bent 2" .120 wall DOM.. $1/ft.

8 lug Dodge roller wheels and tires.. $20

Post by **Billet Benny** » Sun May 18, 2008 10:51 pm

6 lug wheel spacers. 1.5" $50

Post by **Billet Benny** » Sun May 18, 2008 10:53 pm

3" ID, 10" free length, 300 lbs/in Hypercoil coilover springs. qty. 2. $120

Post by **Billet Benny** » Sun May 18, 2008 10:54 pm

Don't forget the np203... $100

Post by **Billet Benny** » Sun May 18, 2008 10:55 pm

Pick some piece of this...

Post by **alk1174** » Mon May 19, 2008 7:30 am

Got any idea on the size of the strip steel? I will probably take it.

Post by **Billet Benny** » Mon May 19, 2008 8:41 am

Not wide.. It's like 2" and 3" wide stuff that's a few feet long. I think the pieces are mostly 3/16" and 1/4" thick. It's just kind of a "grab bag".

Post by **alk1174** » Mon May 19, 2008 9:41 am

sounds good bring it when you come up and I will take it all.

Post by **jac6695** » Mon May 19, 2008 10:57 am

Benny,

You have any 3" x 1/8" or 3/16" angle down there? I need a couple feet, might just buy a length to have if you don't.

Post by **Billet Benny** » Mon May 19, 2008 7:09 pm

I'll look tonight... I think I do.

Post by **hssss** » Mon May 19, 2008 7:40 pm

Billet Benny wrote:Don't forget the np203... $100

Ford or Chevy?
________
Drug Testing

Post by **Billet Benny** » Mon May 19, 2008 10:20 pm

hssss wrote:
Billet Benny wrote:Don't forget the np203... $100
Ford or Chevy?

from behind a th350

Post by **Billet Benny** » Mon May 19, 2008 10:21 pm

jac6695 wrote:Benny,

You have any 3" x 1/8" or 3/16" angle down there? I need a couple feet, might just buy a length to have if you don't.

I found some 4x4 1/4" angle.. I'll look tomorrow in the daylight for 3x3.

Post by **hssss** » Tue May 20, 2008 12:56 am

Didn't know what it was originaly behind. I need a pre broken Ford 203.
________
JAGUAR R2 PICTURE

Post by **jac6695** » Tue May 20, 2008 10:06 am

Billet Benny wrote:
I found some 4x4 1/4" angle.. I'll look tomorrow in the daylight for 3x3.

Don't work too hard looking. I don't mind buying some. It isn't for anything important anyway.

I definetely don't need 1/4"- too heavy.