Chris's 01 XJ

Post by **Jwlman** » Fri Feb 15, 2008 8:29 am

Lukipela wrote:
Steinberg wrote:still no lockers?
Dont want to spend the money for a locker for the chy 8.25,

Why? What size tires to you plan to run?

Post by **BlueDodgeRam** » Fri Feb 15, 2008 9:02 am

Lukipela wrote: Dont want to get down the trail better/do harder stuff.

fixed

Lukipela · Post by **Lukipela** » Fri Feb 15, 2008 10:29 am

Jwlman wrote:
Lukipela wrote:
Steinberg wrote:still no lockers?
Dont want to spend the money for a locker for the chy 8.25,
Why? What size tires to you plan to run?

going to run 33's for now but once they wear out im thinking 34's or 35's, its more of an added security thing then an actual need.

Post by **MtnToys** » Fri Feb 15, 2008 11:37 am

I donâ€™t know shit about heeps. But isnâ€™t Randy running an 8.25? I think if it can stand up to that abuse you should be just fine.

Post by **Jwlman** » Fri Feb 15, 2008 12:04 pm

MtnToys wrote:I donâ€™t know shit about heeps. But isnâ€™t Randy running an 8.25? I think if it can stand up to that abuse you should be just fine.

Yea, he has the 8.25 and a abnormally large right foot

Post by **Arya Ebrahimi** » Fri Feb 15, 2008 12:17 pm

The 8.25 will stand up to 35s just fine. The only reasons I swapped mine for a Toy 8", were my diff was junk, and I needed a larger bolt pattern to match the front. Well, that, and Toy shit is far superior

Post by **BadnewsCJ** » Fri Feb 15, 2008 3:02 pm

BlueDodgeRam wrote:
Lukipela wrote: Dont want to get down the trail better/do harder stuff.
fixed

Post by **shmoken875** » Fri Feb 15, 2008 5:16 pm

MtnToys wrote:I donâ€™t know shit about heeps. But isnâ€™t Randy running an 8.25? I think if it can stand up to that abuse you should be just fine.

now what would make you say a thing like that? lol

Post by **Piranha216** » Sat Feb 16, 2008 6:40 pm

hey i saw that you are runnin 33's and im thinking about moving up tire size this summer. what gears do you have, and do you have any auto or manual?
thanks, trey.

Lukipela · Post by **Lukipela** » Fri Sep 26, 2008 4:26 pm

finally got a locker for the rear axle and i love the thing.

Post by **shmoken875** » Fri Sep 26, 2008 4:54 pm

did ya trim that c-clip?

Lukipela · Post by **Lukipela** » Fri Sep 26, 2008 4:58 pm

nope it went right on with no problems

97JEEPTJ · Post by **97JEEPTJ** » Fri Sep 26, 2008 6:36 pm

So is the powertrax an automatic locker that unlocks when you're turning, but is pretty much locked otherwise?

Lukipela · Post by **Lukipela** » Fri Sep 26, 2008 7:52 pm

97JEEPTJ wrote:So is the powertrax an automatic locker that unlocks when you're turning, but is pretty much locked otherwise?

yeah

Post by **shmoken875** » Sat Sep 27, 2008 11:36 am

Lukipela wrote:nope it went right on with no problems

The problem is not getting it in; it's [potentially] having to take it out. Now I had to take mine out because I didn't get it aligned just perfect like Terry said and broke the active spacers a few months later. BUT, should you break an axle shaft and have to take it apart you might encounter the same situation I did. It's not the most common thin to happen, but it has happened; the c-clip manages to increase in diameter somehow and sometimes won't come out that slot........don't say I didn't warn ya before you put it in, sometimes being pro-active is the best fix.

This happened to me: http://www.naxja.org/forum/showthread.php?t=917883

10 hrs to get a c-clip out