does any one have?
Moderator: Club Officers
does any one have?
i am looking for a set of hubs and rotors for 76-94 ford f150 for my dana 44 axle swap if any one has or knows where to find set id apriciate it
2002 jeep wrangler sport 33 tsls
F150 would be 5-lug.
Honestly, I'd just buy them new. If you shop around you can find the hubs and rotors pre-assembled with studs and bearing races, and oddly the assembled set is sometimes cheaper than a hub alone. If you snag some old hubs from a junkyard or donor truck, you run the risk of the sealing surface for the lockout being jacked up and water gets in there.
I got mine from NAPA. I did once see a new hub explode around the lockout once... I think it was an Autozone or Advance store brand. Terry or Grubb might remember exactly which it was.
Honestly, I'd just buy them new. If you shop around you can find the hubs and rotors pre-assembled with studs and bearing races, and oddly the assembled set is sometimes cheaper than a hub alone. If you snag some old hubs from a junkyard or donor truck, you run the risk of the sealing surface for the lockout being jacked up and water gets in there.
I got mine from NAPA. I did once see a new hub explode around the lockout once... I think it was an Autozone or Advance store brand. Terry or Grubb might remember exactly which it was.
- Attachments
-
- IMG_0563.jpg (321.43 KiB) Viewed 2046 times
The Rescue Ranger: in pieces and scattered about the yard.
yeah ive called around and a new set is kinda pricey i jus got the gears and the bearing kit and trying to find someone to install the gears so trying to keep it low budget as possible til i get it to were its under the jeep jeffs bronco grave yard has the combo new for 89 bucks a side
2002 jeep wrangler sport 33 tsls