XJ axle kits

Post by **Ctrow** » Thu Aug 27, 2009 7:40 pm

Anyone know of a kit you can buy with coil buckets, control arm mounts, and any other goodies you need to put a 44 under an xj?

Post by **Fonger** » Thu Aug 27, 2009 9:04 pm

We used a kit from Dynatrac for Matt Venskoske's (neckbrace) XJ. He's running a full width Chevy Dana 44 front and a Ford 9" rear. Let me know if you need some more specifics and I'll try and get them for you or give you Matt's phone number.

Post by **Ctrow** » Fri Aug 28, 2009 12:19 am

Fonger wrote:We used a kit from Dynatrac for Matt Venskoske's (neckbrace) XJ. He's running a full width Chevy Dana 44 front and a Ford 9" rear. Let me know if you need some more specifics and I'll try and get them for you or give you Matt's phone number.

thanks, some more info would be great, I'm trying to get a number together for doing the swap

Post by **Arya Ebrahimi** » Fri Aug 28, 2009 7:16 am

Ballistic Fabrication sells a setup for the coils/shocks/LCAs that's pretty slick. They don't have anything for the UCA's on their website, but I'm sure if you contacted them they'd probably come up with something.

http://www.ballisticfabrication.com/XJ- ... _1542.html

Post by **Ctrow** » Fri Aug 28, 2009 7:33 am

Arya Ebrahimi wrote:Ballistic Fabrication sells a setup for the coils/shocks/LCAs that's pretty slick. They don't have anything for the UCA's on their website, but I'm sure if you contacted them they'd probably come up with something.

http://www.ballisticfabrication.com/XJ- ... _1542.html

thats bling, I'm assuming the price is for one and not a pair? might have to give them a ring. thanks

Post by **Arya Ebrahimi** » Fri Aug 28, 2009 10:08 am

Usually they sell their brackets in pairs and I don't see where you can specify left or right when ordering, so I'm assuming it's for the pair.

Post by **shmoken875** » Fri Aug 28, 2009 10:28 am

iirc RE and ruffstuff have kits too

Post by **Arya Ebrahimi** » Fri Aug 28, 2009 10:31 am

I looked up the RE kit and it's $410

so that's why I didn't post it

Post by **csult** » Fri Aug 28, 2009 5:04 pm

cut the old shit off and beef it up thats that i did with the rear 44 i had