Scrap steel up for grabs...

Post by **Steinberg** » Sat Jan 16, 2010 2:24 pm

If you want any of this, either get it ASAP, or let me know that you want it set aside ASAP. It's on a borrowed trailer so I'll be recycling whatever isn't taken very soon. Pictures coming any minute....

Post by **Steinberg** » Sat Jan 16, 2010 2:40 pm

If I can hold onto the trailer long enough, I'll bring it all to the meeting tomorrow night for people to pick through.

Summary:
Whole bunch of wire rope
2" Sch40
1.5" Sch40
1" Sch40
2" Square tube, kinda thin wall
1" Square tube, short pieces
1/4"x3" Flat stock
1/4"x2" Flat stock
1/4" plate
1/8"x2" Flat stock
Expanded steel
Solid rod... probably 3/4"... threaded about 4" on the ends

And a whole bunch of these kinda sheet metal "doors", various sizes. I envision welding some up into a toolbox or some similar function.

Post by **zip ties** » Sat Jan 16, 2010 2:53 pm

I need the 1/4" plate.

Post by **Steinberg** » Sat Jan 16, 2010 4:31 pm

ranger under construction wrote:I need the 1/4" plate.

There are (3) approx 8' lengths of the 1/4"x3" flat stock. If you need wider than 3", it will have to be cut off of some weldments.

Post by **ridemx** » Sat Jan 16, 2010 5:58 pm

About how much of each of the sch 40 pipe and how long can you hold it? If you would be able to hold it up till spring break that would be great, I could get you some cash for holding it that long for me. If not depending on the amount and lengths I can pick it up within the week

Post by **Steinberg** » Sat Jan 16, 2010 6:11 pm

ridemx wrote:About how much of each of the sch 40 pipe and how long can you hold it? If you would be able to hold it up till spring break that would be great, I could get you some cash for holding it that long for me. If not depending on the amount and lengths I can pick it up within the week

The 1.5" pipe is in about 6' lengths if that's what you're asking. The 1" pipe is probably max 2' between welds, and there isn't much 2" pipe- one piece about 10' and two pieces like 4' and 6' probably. It can sit at my house for a good while if you tell me specifically what you want.

Post by **BlueDodgeRam** » Sat Jan 16, 2010 6:17 pm

ill take the flat stock if Dave doesnt need it, and possibly the expanded steel. Can either get it from ya at the meeting or i can come get it

Post by **zip ties** » Sun Jan 17, 2010 10:23 am

Peter we can spit it case I don't need that much.

Post by **BlueDodgeRam** » Sun Jan 17, 2010 11:12 am

thatll work

Website · Post by **tsmall07** » Sun Jan 17, 2010 11:55 am

I want the expanded steel. Peter can pick it up for me.

Post by **Steinberg** » Wed Jan 27, 2010 9:52 pm

The rest of this stuff is still sitting at my house...

Post by **Leach** » Fri Jan 29, 2010 2:51 pm

how much 1" square tube left?

Post by **Fizboy** » Sun Feb 07, 2010 2:12 pm

Any of this stuff left? If so what is left?

Post by **Steinberg** » Sun Feb 07, 2010 11:31 pm

yes, come see.