Nick's CJ
Moderator: Club Officers
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Got my fishy plates all welded up and the rear springs hung. Plus some new parts for me to play with.
- Attachments
-
- IMAG0087.jpg (1.18 MiB) Viewed 3152 times
-
- IMAG0086.jpg (1.24 MiB) Viewed 3152 times
-
- IMAG0085.jpg (1.83 MiB) Viewed 3152 times
-
- IMAG0084.jpg (1.11 MiB) Viewed 3152 times
-
- IMAG0081.jpg (1.01 MiB) Viewed 3152 times
Nick
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
time for one of these and a free battery box for will.
http://www.pirate4x4.com/forum/showthread.php?t=883499
http://www.pirate4x4.com/forum/showthread.php?t=883499
John
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
have you decided on a rear end yet? I spotted a 14 bolt and what I think was a dana 70 in a pick-n-pull by my house.
http://maps.google.com/maps?f=q&source= ... 13&iwloc=A
http://maps.google.com/maps?f=q&source= ... 13&iwloc=A
John
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
jstables wrote:have you decided on a rear end yet? I spotted a 14 bolt and what I think was a dana 70 in a pick-n-pull by my house.
http://maps.google.com/maps?f=q&source= ... 13&iwloc=A
I'm open to another 14 bolt or a Dana 70 depending on price. I've found a couple 14 bolts but the axle tubes are just as pitted as mine. And the 70's I've found have either been weird widths or limited to real low (numerically) gear ratios.
Nick
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
ok. and i'm guessing they should be pretty cheap i'll check next week when I go back for break.
John
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
http://www.nc4x4.com/forums/showthread.php?t=100002
Do these count as one uping and spiting Will? Or do I really need to get 43's?
Do these count as one uping and spiting Will? Or do I really need to get 43's?
Nick
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
'79 Jeep
'99 F350 tow rig
'13 TDI Wagen DD
Tits.BadnewsCJ wrote:http://www.nc4x4.com/forums/showthread.php?t=100002
Do these count as one uping and spiting Will? Or do I really need to get 43's?
- willhf1011
- Posts: 1626
- Joined: Sun Jul 05, 2009 12:14 pm
- Location: Baltimore, MD/Blacksburg
I checked on prices at that junkyard and they had both listed for $150 plus core i think was $15. I double checked the axle I thought was a dana 70 was actually a older dana 60 with more ribs on the housing.
back to the build thread...
back to the build thread...
John
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust