James's 88 Yj

Post by **Arya Ebrahimi** » Thu May 05, 2011 7:52 am

shmoken875 wrote:
Jwlman wrote:
willhf1011 wrote:James what is your vertical separation at the frame and axle? It looks like you will be running with a ton of anti-squat. I'm sure you've run the numbers, I'm just curious because I ran into the same issue with my rig and fitting uppers beneath the floor.
About 4 inches at the frame and 6 at the axle. I have it about 76% anti-squat. I am going to move the upper link mounts up and reward some which will drastically drop my anti-squat. Meaning I will either need to move the frame side lower links up or the axle side down below the center of the tube.
wtf is anti-squat? or is that a dumb question?

You're clearly not a Pirate regular. That's all those link suspension guys talk about...anti-squat, roll center, roll axis blah blah blah

Post by **Jwlman** » Thu May 05, 2011 8:07 am

willhf1011 wrote:If you're going to do something to counteract that adjustment I would look at moving the axle side upper up a bit unless there's a really good reason not to. Extra separation at the axle is never a bad thing in terms of strength

That does appear to be the way to go. I spent a lot of time making those tabs contour to the housing

Post by **Jwlman** » Sun Sep 18, 2011 1:10 pm

Occasionally this thing still gets worked on

Modified upper link mounts to sit an inch higher

Post by **BadnewsCJ** » Mon Sep 19, 2011 4:42 pm

Jwlman wrote:Occasionally this thing still gets worked on

Wish I could say the same about my rig

Post by **Jwlman** » Tue Sep 27, 2011 7:22 pm

Post by **shmoken875** » Tue Sep 27, 2011 10:07 pm

Jwlman wrote:

beef

Post by **Jwlman** » Mon Oct 03, 2011 2:02 pm

Close to ride height. Going to have 6" up and 10" down

Post by **Jwlman** » Wed Apr 11, 2012 7:00 pm

Post by **jstables** » Wed Apr 11, 2012 7:10 pm

^^^ looking good

Post by **BadnewsCJ** » Wed Apr 11, 2012 7:13 pm

June 29th completion date?????

And speaking of which, is there a thread on here about the RCQ? You going to that?

Post by **Jwlman** » Wed Apr 11, 2012 7:25 pm

BadnewsCJ wrote:June 29th completion date?????

And speaking of which, is there a thread on here about the RCQ? You going to that?

June 29th 2013 expected completion

When is the RCQ this year?

Post by **Matt612** » Wed Apr 11, 2012 10:36 pm

Looking good... I would kill for a shop like that and a deal like you got on those iroks

Post by **BadAssEddie** » Thu Apr 12, 2012 8:51 am

Sexy Pants!

I'll call you next time I'm home and come wrench with you

Post by **BadnewsCJ** » Thu Apr 12, 2012 12:46 pm

Jwlman wrote:
BadnewsCJ wrote:June 29th completion date?????

And speaking of which, is there a thread on here about the RCQ? You going to that?
June 29th 2013 expected completion

When is the RCQ this year?

June 2nd and 3rd

Post by **Jwlman** » Thu Apr 12, 2012 4:29 pm

BadnewsCJ wrote:
June 2nd and 3rd

Won't make it. I am going to be in Alabama racing superbikes that weekend

Sinking Creek 4WD Association

James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj

Re: James's 88 Yj