Big Event 2013
Moderator: Club Officers
Re: Big Event 2013
Bestop half top and the biggest light bar in the club
Re: Big Event 2013
so, figured this would be my notes for the meeting
WHEN: SATURDAY APRIL 6TH, 2013
REGISTRATION 9-10 (aka if you want a shirt) and for me to get our project or whatever
OPENING CEREMONY from 10:00 to 10:15
TOOL DISTRIBUTION from 10:15 then we go workkk
I will be there early to snag out project
up to 4 hours of service
After 3pm, we arent required to stay and keep working
thats about it, text/pm if ya have questions
Thanks yall for signing up!
IF YOU DONT WANNA READ THIS SHOW UP AT 10:15 ON THE DRILLFIELD!
WHEN: SATURDAY APRIL 6TH, 2013
REGISTRATION 9-10 (aka if you want a shirt) and for me to get our project or whatever
OPENING CEREMONY from 10:00 to 10:15
TOOL DISTRIBUTION from 10:15 then we go workkk
I will be there early to snag out project
up to 4 hours of service
After 3pm, we arent required to stay and keep working
thats about it, text/pm if ya have questions
Thanks yall for signing up!
IF YOU DONT WANNA READ THIS SHOW UP AT 10:15 ON THE DRILLFIELD!
Bestop half top and the biggest light bar in the club
Re: Big Event 2013
...well I had every intention of doing the Big Event with you guys, but looks like I'm going to go pick this up tomorrow:
viewtopic.php?f=18&t=4393
Sorry to bail out at last minute, but hope you guys have a good time.
viewtopic.php?f=18&t=4393
Sorry to bail out at last minute, but hope you guys have a good time.
94 XJ on 31's - 3" Rough Country, 12k lb winch, buck lung snorkel, painted shit desert camo
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Big Event 2013
can't hate on that!
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Big Event 2013
Take out the 14 in lift and put something reasonable in lol
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
- willhf1011
- Posts: 1626
- Joined: Sun Jul 05, 2009 12:14 pm
- Location: Baltimore, MD/Blacksburg
Re: Big Event 2013
mudmike wrote:...well I had every intention of doing the Big Event with you guys, but looks like I'm going to go pick this up tomorrow:
viewtopic.php?f=18&t=4393
Sorry to bail out at last minute, but hope you guys have a good time.
I thought you were kidding about having dibs haha
93 YJ Under Construction
- Matt612
- Vice President
- Posts: 717
- Joined: Mon Aug 22, 2011 4:06 pm
- Location: Williamsburg/Blacksburg
Re: Big Event 2013
Very nice, I agree lower it about 8 inches and it will be much more capable I think
2 door xj with booger welds
Re: Big Event 2013
Yea the 14" is too much. I think I'm going to at least cut and lower the brackets on the front axle (about 3-4" off) and take off the blocks in the back (~2").
...so you have about a 6" lift on yours? The only thing is with this being a 4 door I don't think I could hack as much out of the back fenders as you did. I think the rear could be slid back more though.Matt612 wrote:Very nice, I agree lower it about 8 inches and it will be much more capable I think
94 XJ on 31's - 3" Rough Country, 12k lb winch, buck lung snorkel, painted shit desert camo
- Matt612
- Vice President
- Posts: 717
- Joined: Mon Aug 22, 2011 4:06 pm
- Location: Williamsburg/Blacksburg
Re: Big Event 2013
Yeah I have somewhere around 6" on mine they are 5.5" coil springs that have sagged an inch or so but the new coil buckets make up for that inch. With yours being on 37s I think you can drop in a good amount before you have any issues with body rub. Whats the plan for your current xj once you get this one?
2 door xj with booger welds
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Big Event 2013
If any of you turds missed the sign up and still want to come, you can. just show up and we can grab a shirt or whatever.
For the younguns, we might even spot a rare being out on the drill field tomorrow, called a steinberg. he sets up stages and shit. he once wheeled, now trees grow through the engine compartment of his 'ranger'.
For the younguns, we might even spot a rare being out on the drill field tomorrow, called a steinberg. he sets up stages and shit. he once wheeled, now trees grow through the engine compartment of his 'ranger'.
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Re: Big Event 2013
thanks all for comin out! I think it went pretty well and ended up as a success.
Bestop half top and the biggest light bar in the club
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Big Event 2013
Thanks to Max for organizing this, and to everyone that participated. It was a good time.
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
- Matt612
- Vice President
- Posts: 717
- Joined: Mon Aug 22, 2011 4:06 pm
- Location: Williamsburg/Blacksburg
Re: Big Event 2013
Yeah thanks Max for organizing everything.. thanks to everyone who came out also. Pretty good showing I thought
2 door xj with booger welds
Re: Big Event 2013
Manuel labor, in great weather, on a great piece of land. Was chill
Wrath has no vice when inflicted upon the deserving