Flyer Drive-by Recruiting
Moderator: Club Officers
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Flyer Drive-by Recruiting
When is everyone available to take a couple hours and cruise the parking lots around town to flyer windshields?
Does anyone know where last year's flyer template is? I think Stables did it last year?
I think if we did Friday afternoon, we could give enough time for prospects to set aside Sunday evening (tentative first meeting), but not too long for them to forget.
Available Friday afternoon:
1. Alec (free from 2pm on)
Does anyone know where last year's flyer template is? I think Stables did it last year?
I think if we did Friday afternoon, we could give enough time for prospects to set aside Sunday evening (tentative first meeting), but not too long for them to forget.
Available Friday afternoon:
1. Alec (free from 2pm on)
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Flyer Drive-by Recruiting
(I did the fliers last year, printed them out at least. I was writing this post as you wrote yours, so I am just copying what I had said. Sorry for the overlap)
Working on getting fliers put together for this year. I'll need some input from the everyone on a few things. Need to nail down some meeting dates and info to include on the flier. Also, I am printing them out as well.
Meetings:
Every other Sunday at 7pm in the corner of the Comm Lot.
When would we like to start meetings? 9/8 or 9/15?
Fliers:
1/4 Sheet of 8.5 x 11 Paper
Name and Logo
Forum Address
Meeting dates, times, and where we meet. (I'll try and include a map on the back)
Small summary of background information and who we are.
Business cards:
Coming up with some simple cards to hand out after talking with a person. Little reassurance that they'll remember who we are.
I'd like to get the fliers made ASAP, any input would be really helpful.
Lastly when they are all printed, who'd be interested in putting them on Jeeps, trucks, etc? We could do a divide and conquer type deal as well.
Working on getting fliers put together for this year. I'll need some input from the everyone on a few things. Need to nail down some meeting dates and info to include on the flier. Also, I am printing them out as well.
Meetings:
Every other Sunday at 7pm in the corner of the Comm Lot.
When would we like to start meetings? 9/8 or 9/15?
Fliers:
1/4 Sheet of 8.5 x 11 Paper
Name and Logo
Forum Address
Meeting dates, times, and where we meet. (I'll try and include a map on the back)
Small summary of background information and who we are.
Business cards:
Coming up with some simple cards to hand out after talking with a person. Little reassurance that they'll remember who we are.
I'd like to get the fliers made ASAP, any input would be really helpful.
Lastly when they are all printed, who'd be interested in putting them on Jeeps, trucks, etc? We could do a divide and conquer type deal as well.
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Flyer Drive-by Recruiting
I'd like to shoot for a first meeting this Sunday.
Everything else sounds good. If you want to just alter the dates on the old flyers, that would be fine. Anything else you want to do would be great as far as I'm concerned. Feel free to take artistic license with it. As long as people know who we are, where we meet, and what we do, and it's not pink or JeepForum sponsored, I'm game.
Do you think you would be able to get a few hundred printed out by Friday afternoon?
Everything else sounds good. If you want to just alter the dates on the old flyers, that would be fine. Anything else you want to do would be great as far as I'm concerned. Feel free to take artistic license with it. As long as people know who we are, where we meet, and what we do, and it's not pink or JeepForum sponsored, I'm game.
Do you think you would be able to get a few hundred printed out by Friday afternoon?
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Flyer Drive-by Recruiting
I can be available any afternoon to run around.
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Re: Flyer Drive-by Recruiting
There might be a JF watermark on the back of the fliers, maybe a *little* bit of WJ on there too.
I can print out as many as we need, I've got a big machine in my room. I figure I can make about 300 in 15 minutes. So it'll be fine.
I can't find whatever I did last year, I am working on a new one. I just need some dates to finalize it whenever can hammer those out.
I'll post a preview before I run them all off as well.
I can print out as many as we need, I've got a big machine in my room. I figure I can make about 300 in 15 minutes. So it'll be fine.
I can't find whatever I did last year, I am working on a new one. I just need some dates to finalize it whenever can hammer those out.
I'll post a preview before I run them all off as well.
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Flyer Drive-by Recruiting
Sounds good Mike, thanks!Mr.WJ wrote:There might be a JF watermark on the back of the fliers, maybe a *little* bit of WJ on there too.
I can print out as many as we need, I've got a big machine in my room. I figure I can make about 300 in 15 minutes. So it'll be fine.
I can't find whatever I did last year, I am working on a new one. I just need some dates to finalize it whenever can hammer those out.
I'll post a preview before I run them all off as well.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
Re: Flyer Drive-by Recruiting
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Flyer Drive-by Recruiting
hell yeah looks nice. lets confirm first newbie meeting date.
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Re: Flyer Drive-by Recruiting
Business Card Preview. Simple and Effective. Anything else I should add?
https://www.dropbox.com/s/delcexxewhhth ... rd%201.JPG
https://www.dropbox.com/s/delcexxewhhth ... rd%201.JPG
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Flyer Drive-by Recruiting
Looks legit.
Set the fist meeting date for Sept 1. They can come to the next one if they cant make this Sunday. Maybe put the dates of the first 3 meetings on there for assurance.
Set the fist meeting date for Sept 1. They can come to the next one if they cant make this Sunday. Maybe put the dates of the first 3 meetings on there for assurance.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
- Lil Whitey
- Posts: 358
- Joined: Fri Dec 28, 2012 1:01 am
Re: Flyer Drive-by Recruiting
Start the presses!
(printing presses )
(printing presses )
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
Club President 2010-2011 VP 2009-2010
Representing SC4WDA from the land of Texas currently. Way too flat....
- willhf1011
- Posts: 1626
- Joined: Sun Jul 05, 2009 12:14 pm
- Location: Baltimore, MD/Blacksburg
Re: Flyer Drive-by Recruiting
Change Jeep/Truck to 4x4.
Also, I will be out of town this Sunday due to Baltimore GP
Also, I will be out of town this Sunday due to Baltimore GP
93 YJ Under Construction
Re: Flyer Drive-by Recruiting
Changed Jeep/Truck to 4x4
Listing first three meeting dates, September 1st, 15th and 29th
Printed 200 Fliers - Check
Ordered 500 Biz Cards - Check
Listing first three meeting dates, September 1st, 15th and 29th
Printed 200 Fliers - Check
Ordered 500 Biz Cards - Check
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
Re: Flyer Drive-by Recruiting
Hey fellas, good to be back in town.
I'm good to help out after 5 pm
Those fliers and business cards look good
I'm good to help out after 5 pm
Those fliers and business cards look good
Wrath has no vice when inflicted upon the deserving
Re: Flyer Drive-by Recruiting
I can help on Friday after 1:30
John
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust