Minty Clean Free Jeep..

Show off your build here!

Moderator: Club Officers

User avatar
Matt612
Vice President
Posts: 717
Joined: Mon Aug 22, 2011 4:06 pm
Location: Williamsburg/Blacksburg

Re: Minty Clean Free Jeep..

Post by Matt612 »

You can have them for $300, look for dodge magnum wheels, they are stock 17"s with 5x4.5" bolt pattern. Also dodge nitros came stock with 17s 5x4.5" bolt pattern. Or you can always buy some steelies.
2 door xj with booger welds
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Re: Minty Clean Free Jeep..

Post by jstables »

Yeah I dont have the money for them right now but that is a sweet deal
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: Minty Clean Free Jeep..

Post by BadAssEddie »

jstables wrote:Yeah I dont have the money for them right now but that is a sweet deal
Sell your S-10.

And, how many fishing poles does a man need? Lol, you have like 18.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Re: Minty Clean Free Jeep..

Post by jstables »

Decided on grooving them instead...


So I need some opinions on what way to go about it from this tire pattern.

Image


This is kinda what I was thinkin sorta a MTR Kevlar look

Image
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: Minty Clean Free Jeep..

Post by BadAssEddie »

I think that'll work well. Make sure you get a 12 pack of beer before you do it. Shit is a bit tedious lol.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
User avatar
Lil Whitey
Posts: 358
Joined: Fri Dec 28, 2012 1:01 am

Re: Minty Clean Free Jeep..

Post by Lil Whitey »

I hope you're going to groove in between the tread blocks first.


Ideas:
http://www.pirate4x4.com/forum/general- ... rains.html


http://www.pirate4x4.com/forum/general- ... rains.html
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010

Representing SC4WDA from the land of Texas currently. Way too flat.... :rainbow:
User avatar
Lil Whitey
Posts: 358
Joined: Fri Dec 28, 2012 1:01 am

Re: Minty Clean Free Jeep..

Post by Lil Whitey »

I would suggest grooving the red out first. and then see how you're looking and figure out what you want to do with the tread blocks. :beer:
Attachments
xterrain 1.jpg
xterrain 1.jpg (49.75 KiB) Viewed 21091 times
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010

Representing SC4WDA from the land of Texas currently. Way too flat.... :rainbow:
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Re: Minty Clean Free Jeep..

Post by jstables »

Crappy start to a wheeling trip but the damage was not too bad...

Image

Image

Threw the center pin outta the carrier not so bad.

Image

But tearing it further apart

Image

The lock rite is toast

Image

Image

Image

Image
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
User avatar
Lil Whitey
Posts: 358
Joined: Fri Dec 28, 2012 1:01 am

Re: Minty Clean Free Jeep..

Post by Lil Whitey »

Well shit, if the gears are okay, I'd take that as not a bad deal considering your front end locked up...
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010

Representing SC4WDA from the land of Texas currently. Way too flat.... :rainbow:
User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: Minty Clean Free Jeep..

Post by BadAssEddie »

Lil Whitey wrote:Well shit, if the gears are okay, I'd take that as not a bad deal considering your front end locked up...
Isn't that his 8.8?
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
User avatar
Matt612
Vice President
Posts: 717
Joined: Mon Aug 22, 2011 4:06 pm
Location: Williamsburg/Blacksburg

Re: Minty Clean Free Jeep..

Post by Matt612 »

Damn Stables thats a bummer, the 8.8 is something I would have thought you would never have trouble with especially on 35s.
2 door xj with booger welds
User avatar
Lil Whitey
Posts: 358
Joined: Fri Dec 28, 2012 1:01 am

Re: Minty Clean Free Jeep..

Post by Lil Whitey »

Oh I thought it was his front end. either way.
Jake--Lube specialist--Formerly 97JEEPTJ
Club President 2010-2011 VP 2009-2010

Representing SC4WDA from the land of Texas currently. Way too flat.... :rainbow:
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Re: Minty Clean Free Jeep..

Post by jstables »

Oh and I found more damage :roll: its even on both sides..

Image
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
User avatar
InvertChaos
Posts: 140
Joined: Sat Sep 01, 2012 2:30 am

Re: Minty Clean Free Jeep..

Post by InvertChaos »

jstables wrote:Oh and I found more damage :roll: its even on both sides..

Image
Ouch. I was wondering if the leafs had been damaged...there's my answer. Sorry to hear.
|2004 Jeep TJ "Green Machine"|4.0L 5 speed Dana44|33x12.50x15 Goodyear Duratracs|2.5" OME HD coils + 1.25" BL|OME NitroSport shocks|4.56 gears w/Detroit Trutrac|Skid Row Engine Skid|BCC Sliders|Currie AntiRock|
User avatar
jstables
Posts: 538
Joined: Sat Sep 26, 2009 6:12 pm
Location: Blacksburg

Re: Minty Clean Free Jeep..

Post by jstables »

Good news for the week finally went to agees today and found some springs with lift shackles also grabbed the front spacers just cause they were there.

Image
John

DD-05 F150/Lariat 4dr/5.4/dual exhaust
Beater-Free 1988 XJ/~4"s10 leaf & 4.5"coils/long arms/35s
Trail-1984 s10 blazer/350/700r4/D44 & D60 welded/workin on highsteer
Sold!-1991 s10 blazer/4.3/bodylift/camaro rims/2.5 exhaust
Post Reply