Recently decided that I wanted to build a cage over winter break and need some more metal to do so, probably won't place the order till after thanksgiving.
Sam - 4 stick 1.75 DOM x.12
Metal Order
Moderator: Club Officers
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Metal Order
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Metal Order
hmmm cage party at sams place over winter break?! I need to find some poo poo pipe to build my exo 
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
Re: Metal Order
I would be down for half a sheet of 3/16, been thinking about building a bumper.
Grubb, are you going to use the whole stick?
Grubb, are you going to use the whole stick?
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |
Re: Metal Order
Nope, I'll probably use 12-14 ft max. I'll split a sheet of 3/16 with you
slanted tire carriers 
-
BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
Re: Metal Order
1 stick of 1.75 x.120 wall
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Metal Order
not really
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
Re: Metal Order
I took mine to an exhaust shop and got it bent at 45 degrees for my sliders
05 WK - SOLD
98 ZJ w/ Ford axles, Maxxis Taars, Long Arms etc.
11 Duramax
98 ZJ w/ Ford axles, Maxxis Taars, Long Arms etc.
11 Duramax
Re: Metal Order
Is there a place in bburg that will bend tube?VT-05WK wrote:I took mine to an exhaust shop and got it bent at 45 degrees for my sliders
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |
Re: Metal Order
I didn't find anyone with an actual bender when I was looking. Pretty much any exhaust shop will be able to do it
05 WK - SOLD
98 ZJ w/ Ford axles, Maxxis Taars, Long Arms etc.
11 Duramax
98 ZJ w/ Ford axles, Maxxis Taars, Long Arms etc.
11 Duramax
-
FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Metal Order
LIST UPDATE: Metal Order #2
Sam - 4 stick 1.75 x.120wall DOM
Grubb- 1 stick 1.75 x.120 wall DOM, 4x4 3/16 plate
Patrick H. -4x4 3/16 plate
Alec- 1 stick 1.75 x.120wall DOM
Wong- 1 stick 2x4 3/16 wall ERW, 1 stick 2x2 .120 wall ERW
Sam - 4 stick 1.75 x.120wall DOM
Grubb- 1 stick 1.75 x.120 wall DOM, 4x4 3/16 plate
Patrick H. -4x4 3/16 plate
Alec- 1 stick 1.75 x.120wall DOM
Wong- 1 stick 2x4 3/16 wall ERW, 1 stick 2x2 .120 wall ERW
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
-
FJCcrawler
- Posts: 505
- Joined: Fri Aug 30, 2013 7:18 pm
Re: Metal Order
Here's the pricing for most of it. It should be pretty up to date given that this was from a month ago. Kev, can you could get a price on the 2x4 3/16wall ERW?
4x8 sheets of 3/16 are $100 a piece
1.75 .120 wall DOM - $3.22 per foot
1.75 .095 HREW -$1.30 per foot
2x2 .120 Square ERW is $44 for 24 ft piece
1.5 .120 wall DOM - $2.85 per foot
1.5 .120 wall HREW-$2.18 per foot and its a 24ft piece
1.5 .25 wall DOM - $5 per foot
2x4 .120 wall Square ERW - $4.66 per foot
4x8 sheets of 3/16 are $100 a piece
1.75 .120 wall DOM - $3.22 per foot
1.75 .095 HREW -$1.30 per foot
2x2 .120 Square ERW is $44 for 24 ft piece
1.5 .120 wall DOM - $2.85 per foot
1.5 .120 wall HREW-$2.18 per foot and its a 24ft piece
1.5 .25 wall DOM - $5 per foot
2x4 .120 wall Square ERW - $4.66 per foot
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
-
redneckrapunzel
- Posts: 572
- Joined: Wed Oct 01, 2014 10:48 am
Re: Metal Order
when i get back monday ill call on prices
1997 TJ
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the and worked, you'd be almost done." - alec
^ very true ^
04 superduty
10 civic #nolifelikethelowlife
"If you'd stop flirting with the
and worked, you'd be almost done." - alec^ very true ^
-
UNIMOG-GUY
- Posts: 277
- Joined: Tue May 13, 2008 6:10 pm
- Location: Blacksburg, VA
- Contact:
Re: Metal Order
Will you price me a Schedule 80 pipe 30' long? I need it for the base (pole) of my sign. The sign below has 2 sides and is 7'x7'.
Thank you in advance!
Thank you in advance!
- image.jpeg (185.04 KiB) Viewed 17878 times
1965 Mercedes Benz Unimog 404 w/ MB-A 7 ton PTO winch and crawler gears for 413:1 crawl ratio, LPG
1986 Chevrolet CUCV M1008 FOR SALE
1986 Chevrolet CUCV M1028 w/ snowplow and H1 rims and 37" tires FOR SALE
An original member of the SC4WDA.
1986 Chevrolet CUCV M1008 FOR SALE
1986 Chevrolet CUCV M1028 w/ snowplow and H1 rims and 37" tires FOR SALE
An original member of the SC4WDA.