Nitto Ridge Grappler

Wrenching and Technical Information

Moderator: Club Officers

Post Reply
User avatar
NJKURPat
Posts: 171
Joined: Mon Oct 06, 2014 2:37 pm

Nitto Ridge Grappler

Post by NJKURPat »

New tire produced by Nitto. Looks to be aiming to compete with the duratrac. Somewhere between a MT and AT.

http://www.nittotire.com/light-truck-ti ... ruck-tire/

Whats everyone think?
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |
User avatar
TerryD
Posts: 1905
Joined: Mon Sep 04, 2006 7:57 pm
Location: Covington, Va
Contact:

Re: Nitto Ridge Grappler

Post by TerryD »

Looks like they are only 17-22". Aiming at the truck nutz crowd I guess.
Terry
Offroading: The hobby of turning perfectly good vehicles into scrap metal. :cool:
User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: Nitto Ridge Grappler

Post by BadAssEddie »

TerryD wrote:Looks like they are only 17-22". Aiming at the truck nutz crowd I guess.
Hahah, I'd say that is a big market share for Nitto.

I have 17s in the Bronco because that is what the LTBs come in. I think the 16 is slowly going away and being replaced by 17s. I probably would have 17s on my truck too but the 315R16 is .2" taller than the 315R17 :flipoff2:

I guess they dont think the 15" market is there for Jeeps and older half tons? I know its the cool thing to have a JK on 18s now, but there are still a million TJs, I'm surprised.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
User avatar
FJCcrawler
Posts: 505
Joined: Fri Aug 30, 2013 7:18 pm

Re: Nitto Ridge Grappler

Post by FJCcrawler »

It seems like 17" wheels are becoming pretty standard for most off road tires these days. I liked running 16" for a while, but switched to 17s just to run 37s as 37x12.50r17s were a much more common size than 37s for 16s. Im guessing most of the tire sizes are also gonna be E range rated for the heavier diesels. They look pretty good, price comparisons between the ridge graps, KO2s, and duratracs?
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
User avatar
NJKURPat
Posts: 171
Joined: Mon Oct 06, 2014 2:37 pm

Re: Nitto Ridge Grappler

Post by NJKURPat »

JKs are probably a larg factor. Only some of the 15"s fit on the factory JK, and you cant clear any larger steering without running a 17" wheel.

Although everyone on 18" probably has no idea what larger steering is...
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |
User avatar
Mr.WJ
Website Admin
Posts: 865
Joined: Fri Aug 26, 2011 8:06 pm
Location: Blacksburg/Chesapeake, VA

Re: Nitto Ridge Grappler

Post by Mr.WJ »

17's are the new 15's. Don't know any new SUV with less than a 17 anymore haha. Most trucks come with 20's nowadays.
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs :cool:
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
User avatar
FJCcrawler
Posts: 505
Joined: Fri Aug 30, 2013 7:18 pm

Re: Nitto Ridge Grappler

Post by FJCcrawler »

Mr.WJ wrote:17's are the new 15's. Don't know any new SUV with less than a 17 anymore haha. Most trucks come with 20's nowadays.
New tacomas and 4runners come with 16s... :flipoff2:
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
User avatar
Mr.WJ
Website Admin
Posts: 865
Joined: Fri Aug 26, 2011 8:06 pm
Location: Blacksburg/Chesapeake, VA

Re: Nitto Ridge Grappler

Post by Mr.WJ »

FJCcrawler wrote:
Mr.WJ wrote:17's are the new 15's. Don't know any new SUV with less than a 17 anymore haha. Most trucks come with 20's nowadays.
New tacomas and 4runners come with 16s... :flipoff2:
Even the nice ones?
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs :cool:
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
User avatar
FJCcrawler
Posts: 505
Joined: Fri Aug 30, 2013 7:18 pm

Re: Nitto Ridge Grappler

Post by FJCcrawler »

Mr.WJ wrote:
FJCcrawler wrote:
Mr.WJ wrote:17's are the new 15's. Don't know any new SUV with less than a 17 anymore haha. Most trucks come with 20's nowadays.
New tacomas and 4runners come with 16s... :flipoff2:
Even the nice ones?
The upper trim levels have 18s and 19s I think, but the standard sr5 and sport models still run 16s and 17s
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
User avatar
Mr.WJ
Website Admin
Posts: 865
Joined: Fri Aug 26, 2011 8:06 pm
Location: Blacksburg/Chesapeake, VA

Re: Nitto Ridge Grappler

Post by Mr.WJ »

FJCcrawler wrote:The upper trim levels have 18s and 19s I think, but the standard sr5 and sport models still run 16s and 17s
Fair enough, but point being, the standard sizes are increasing.
- 04 WJ Overland 4.7 HO, Bilstein 4600s, Tuned, 242HD Swap, 31" A/T's for cool kids
- 04 WJ Laredo 4.0, 3" OME HD Lift, Bilstein 5100s, JKS TB, IRO LCA's UCA's
- 05 LJ Rubicon 4.0, 3" OME HD Lift, Bilstein 5100's, JKS TB, Bumpers, Warn 9500ix, on 33 MTRs :cool:
- Bronco Water Pump Specialist, now leaks, fixed again and leaks for the second time
User avatar
wheelertaco
Posts: 318
Joined: Tue Oct 08, 2013 8:54 pm
Location: Yorktown/Blacksburg

Re: Nitto Ridge Grappler

Post by wheelertaco »

Look like a nice aggressive A/T unfortunately I got a nice set of 16" t4r wheels (which i still need the spare Wong)
"I am 110% winging it, and I have no idea what the fuck I'm doing." - Sam Paras

Godsamnit Dam
User avatar
FJCcrawler
Posts: 505
Joined: Fri Aug 30, 2013 7:18 pm

Re: Nitto Ridge Grappler

Post by FJCcrawler »

wheelertaco wrote:Look like a nice aggressive A/T unfortunately I got a nice set of 16" t4r wheels (which i still need the spare Wong)
Its here at the house if want to come get it! I have 2 spare 37s on 17" wheels now so I have no use for my old wheel, might even persuade you to go up to 35s since there's already one mounted to it. :flipoff2:
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris
User avatar
wheelertaco
Posts: 318
Joined: Tue Oct 08, 2013 8:54 pm
Location: Yorktown/Blacksburg

Re: Nitto Ridge Grappler

Post by wheelertaco »

I'll pick it up when I'm there for the Liberty game!
"I am 110% winging it, and I have no idea what the fuck I'm doing." - Sam Paras

Godsamnit Dam
Post Reply