Parts, vehicles, fab and mechanic work, etc.
Moderator: Club Officers
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Wed Feb 07, 2007 3:29 pm
I have a ford 9" out of a 1978 f-150. $250
I believe it is a big bearing 31 spline
You know you want it cody. Replace that dana 35
Last edited by
Jwlman on Wed Feb 07, 2007 4:33 pm, edited 1 time in total.
tsmall07
Posts: 753 Joined: Wed Jan 26, 2005 4:10 pmLocation: Blacksburg VA
Contact:
Post
by tsmall07 Wed Feb 07, 2007 3:51 pm
why don't you replace your dana 35 with it?
"The American Indians found out what happens when you don't control immigration."
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Wed Feb 07, 2007 4:04 pm
tsmall07 wrote: why don't you replace your dana 35 with it?
Cause my dana 35 is sitting on the floor of my garage and it wouldn't do much good there
jonesy
Posts: 720 Joined: Sat Jan 14, 2006 12:16 amLocation: Blacksburg
Post
by jonesy Thu Feb 15, 2007 8:44 pm
you selling that D44 too?
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Thu Feb 15, 2007 9:28 pm
affende wrote: you selling that D44 too?
Yes for $300
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Thu Feb 15, 2007 9:32 pm
Buy them both and I will even help you install them
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Thu Feb 15, 2007 9:32 pm
Never had a chance to check but most likely 3.55s and possibly 4.10s
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Wed Feb 21, 2007 5:12 pm
both axles for $400.
JPN High
Posts: 70 Joined: Tue Sep 06, 2005 5:55 pmLocation: Radford, VA
Post
by JPN High Fri Mar 02, 2007 9:04 pm
These still forsale? I might have someone interested.
03 RED TJ Sport
hssss
Posts: 123 Joined: Sat Feb 24, 2007 3:29 amLocation: 45 miles from nowhere
Contact:
Post
by hssss Fri Mar 02, 2007 11:59 pm
I would be interested in the radius rods. PM with a #.
________
Toyota Boshoku Specifications
Last edited by
hssss on Fri Feb 11, 2011 9:52 pm, edited 1 time in total.
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Sun Mar 04, 2007 1:11 am
hssss wrote: I would be interested in the radius rods. PM with a #.
Damn, wish I saw this earlier. I just finished cutting them off.
The axles are sold
hssss
Posts: 123 Joined: Sat Feb 24, 2007 3:29 amLocation: 45 miles from nowhere
Contact:
Post
by hssss Sun Mar 04, 2007 3:06 am
I need the spring pockets, shock towers, frame mounts, etc. I'm putting a YJ on a 79 Bronco chassis and want to use the front suspension setup for the rear for articulation and to allow shortning the wb.
________
Hotbox Vaporizers
Last edited by
hssss on Fri Feb 11, 2011 9:52 pm, edited 1 time in total.
Steinberg
Posts: 2182 Joined: Tue Dec 14, 2004 9:52 pm
Post
by Steinberg Sun Mar 04, 2007 12:05 pm
you cut them off?!?!?
The Rescue Ranger: in pieces and scattered about the yard.
Jwlman
Posts: 1318 Joined: Mon Aug 29, 2005 3:03 pmLocation: Richmond
Post
by Jwlman Sun Mar 04, 2007 12:39 pm
Steinberg wrote: you cut them off?!?!?
Yea, turnes out that the dana 44 I got is an eariler one cause the radius arm mounts were weled on and not cast on so I can still use the axle
