Auditorium Sale

Post by **hssss** » Tue Mar 13, 2007 11:37 pm

4.10:1 YJ D30 & 35 just rebuilt with 0 miles rear is non C clip and has Detroit locker, new rotors, rebuilt calipers, new pads & shoes... $1,000

3.08:1 YJ stock axles front/rear includes brakes... $300 have 2 sets

D30 axles both sids with disco sleve... $100

'87 YJ 5 speed and transfer case, good condition... $500

Waggy TH400 + Tcase... $400

'00 XJ 231 with approx 1k miles from new... $300

YJ shackel reverse with built in receiver and buggy spring... $250

YJ stock springs... $75 have 2 sets

ZJ D30 axle shafts/CVs... $100

D20 TC I think from Waggy... $100

D20 PTO... $100

More to come, need 35 12.50 15s
________
Marijuana joint

Post by **maybs** » Wed Mar 14, 2007 2:59 pm

I'm interested in both sets of the YJ springs. What kind of shape are they in?

Post by **hssss** » Fri Mar 16, 2007 12:49 pm

IIRC one set came from a 94 YJ they have had the bushings removed, wire brushed, and rattlecanned flat black and are in very good shape. The other are currently holding up an 87 YJ that is about to be taken apart.If you buy both I have a set of poly bushings that I'll sell for 2/3 retail (save 1/3 & postage) the rear set have 0 miles and the front have about 100 street miles.
________
BUY VAPOR TOWER

Post by YJ » Fri Mar 16, 2007 11:24 pm

I got second dibs on a set of YJ springs if maybs don't take them. I kinda need em ASAP. Any way we could catch up Sat, or Sun?

Post by **hssss** » Fri Mar 16, 2007 11:45 pm

Depennding on maybs. we could probably get together either day or I may be coming to BBurg sat.
________
Silver Surfer Vaporizer

Post by YJ » Sat Mar 17, 2007 12:18 am

Saturday, I'm pretty flexible. Sunday is still up in the air right now.

Cell is 540-605-6500

I may not be around the comp and miss a post.

Post by **maybs** » Sat Mar 17, 2007 9:53 am

Sounds like I'd like them both... sorry Hutch. I'll probably also take the poly bushings. I'm leaving bburg this morning and won't be back in town until Sunday afternoon/evening. Where are you located? I'm going to be down in Carroll County (Hillsville, Fancy Gap, Galax area) in case you're down that way.

Post by **hssss** » Sat Mar 17, 2007 11:16 am

I'm in Glen Lyn. PM a phone # and I'll give you a shout.
________
Aprilia Rsv1000R

Post by **maybs** » Sat Mar 17, 2007 5:35 pm

Hutch, after talking on the phone, I found out I was confused about how many springs constituted a set. He's talking about each set being 4 packs of springs. So, I'll just be taking the '94s and the poly bushings. The '87s are no longer spoken for by me.

Post by **Arya Ebrahimi** » Sat Mar 17, 2007 6:00 pm

Is anyone going to pick these up? or Jim, are you coming to BBurg to deliver them? Whichever way it goes, I need to get some fenders to Jim. So someone please contact me. 757 438 1328

Post by **hssss** » Sun Mar 18, 2007 3:12 am

Hutch
I'll give you a call Sun, it's now 3:05 AM and you prolly wouldn't appreciate a call right now. The YJ needs to be inside where the Bronco frame is so I can pull it apart.
________
Silver surfer vaporizer

Post by **Jwlman** » Sun Mar 18, 2007 11:08 am

If someone is going to pick stuff up from him and would take him the radius rods he want from me, let me know

Post by **maybs** » Sat Mar 31, 2007 10:09 am

Don't know if anyone has made arrangements with hutch already... but, we're meeting at 11:30am today at Hardee's to go up to the auditorium. We're riding in one of hutch's trucks, so I can't speak for him but I would imagine if someone were to be at Hardee's at that time (or a few minutes early), you could probably get your stuff taken up there.