ToYota rear axle, tcases, tranny, NP203, sm465

Post by **Billet Benny** » Sat May 28, 2005 11:27 am

Toy IFS rear axle. Very little rust, good shape, runs fine and in need of no new parts. Don't know gear ratio but probably 4.10's. Open diff. Complete. $120. <---THIS HAS SOLD.

th350 version np203. If you want to double up behind your th350 that's what this thing is for! $125

If anyone wants an sm465 with the top plate pulled off I have one of those too.. It's a 32 spline output model, but I sold the bellhousing off of it. It's in fair shape and came out of a semi-running one ton truck a couple years ago. I just want it gone because I won't need it for any reason. Leach, it's full of cool paper weights! $30 <---SOLD

I have a 350 tbi flywheel I want gone.. It would need resurfacing and came off an '87 (one piece rear main) motor. $20

Toyota w56 tranny in need of a rebuild. Pops out of I think 3rd gear when you get off the gas and then back in it. Out of early 90's truck. $100 <--Spoken for

Toyota tcase from behind above tranny. 4cyl and forward shift. $100

Few other Toyota 4cyl tcases. Top shift $150.

Post by **Billet Benny** » Fri Sep 02, 2005 8:53 am

Also will need to get rid of some roller wheels and tires. 6 lug with something like 32" old ass school bfg muds on them. Make an offer.

Post by **Billet Benny** » Sun Jun 11, 2006 5:08 pm

Also have an AMC engine to chevy auto tranny adapter. It's never been used. It needs to go too. Have the 360 flexplate needed for this conversion too. $150 for adapter and $50 for flexplate.

Post by **Leach** » Mon Jun 12, 2006 9:27 pm

Hey man just saw this. I think I'm gonna pass on the axle (just no money now/gonna build another set and stick the 8in/going bigger) but I will pass it around. You could always go to Jasons and sawzall one of his axle tubes in half, then sells yours to him. He never is on this site, he'll never know.

Leach

Post by **Billet Benny** » Fri Sep 01, 2006 3:51 pm

Updated 9/01/06

Post by **MILLER** » Tue Sep 19, 2006 12:11 pm

Leach, don't make we slam you again, fawker.

Benny, I am interested in your toy IFS axle, before sawsalling mine. kinda just want the housing though, want to part it out? I think Krantz wants shafts.

Post by **yotacowboy** » Tue Sep 19, 2006 7:58 pm

lenny,

hold on to that w56, next month i get my pay raise, so i'll be able to afford it then.

Post by **jonesy** » Wed Sep 20, 2006 12:51 am

what condition is that top shift 4cyl tcase in? i might be interested...

currupt4130 · Post by **currupt4130** » Wed Sep 20, 2006 2:50 am

The th350 is off a chevy 350 isnt it?

Post by **Billet Benny** » Thu Sep 28, 2006 1:40 pm

MILLER wrote: Benny, I am interested in your toy IFS axle, before sawsalling mine. kinda just want the housing though, want to part it out? I think Krantz wants shafts.

$120 for the housing.. You buy the whole thing and sell him the shafts or vice versa I don't care. I'm not parting it out though.

Post by **Billet Benny** » Thu Sep 28, 2006 5:13 pm

yotacowboy wrote:lenny,

hold on to that w56, next month i get my pay raise, so i'll be able to afford it then.

Consider it held for you.

Post by **Billet Benny** » Thu Sep 28, 2006 5:14 pm

affende wrote:what condition is that top shift 4cyl tcase in? i might be interested...

Got a couple.. I call them "junkyard" condition. Meaning I've never seen it run, but looks like a good part. No obvious visual or non-visual abnormalities.

Post by **Billet Benny** » Thu Sep 28, 2006 5:16 pm

currupt4130 wrote:The th350 is off a chevy 350 isnt it?

Sam,
No th350's for sale. Just a np203 that came from behind a th350.. i.e. a "th350 version np203". You want a th350?

Post by **Billet Benny** » Tue Oct 10, 2006 10:32 am

MILLER wrote:Leach, don't make we slam you again, fawker.

Benny, I am interested in your toy IFS axle, before sawsalling mine. kinda just want the housing though, want to part it out? I think Krantz wants shafts.

I think Krantz wants a second housing as well. It may be up for grabs because an opportunity has arisen to possibly part it out but how do I decide who to sell it to? But the shafts need to be spoken for by someone.

Post by **alk1174** » Tue Oct 10, 2006 12:00 pm

If you want to sell the housing and shafts together (no third) I will do that if it will make it easier on ya. I do have cash now. if Jason is first in line i can understand that.
Adam