Page 1 of 1
WTB D70U 35 spline 4.56+ open carrier
Posted: Sun Oct 28, 2007 3:45 pm
by BlueDodgeRam
i need a carrier for a D70U with 35 spline shafts. has to be for 4.56 gears and numerically higher gears. can be welded, or open. no LSD carriers. lemme know if you know of one. thanks.
Posted: Sun Oct 28, 2007 10:44 pm
by The Beav
I thought 70U's only had 32 spline carriers??
I have a friend right now dealing with this crap. He keeps breaking 32 spline shafts in his and would like to go to 35 spline...
Posted: Mon Oct 29, 2007 2:00 am
by BlueDodgeRam
certain D70Us(like in Dodges) have the 32 spline shafts. mines out of an 80s ford so it has the 35ers.
i just need the 4.56+ carrier because mine has 3.55s, and im running 5.13s
Posted: Mon Oct 29, 2007 8:00 pm
by The Beav
Will the Ford carrier swap over to the Dodge?
Posted: Tue Oct 30, 2007 12:30 am
by BlueDodgeRam
as long as its a 70U or regular 70 it will. 70Us and 70s have a 5/8" pinion offset, while the 70HDs have a different offset.
the only thing bad about D70s are that there are so many different variations, it gets confusing.
Posted: Tue Oct 30, 2007 10:12 pm
by Steinberg
you could run a ring gear spacer on the low-gear carrier.
Posted: Tue Oct 30, 2007 10:15 pm
by BlueDodgeRam
no ring gear spacers for D70s
Posted: Tue Oct 30, 2007 10:16 pm
by shmoken875
BlueDodgeRam wrote:no ring gear spacers for D70s
I got a bunch of beer can tabs laying around that you could just throw between the ring and carrier.
Posted: Tue Oct 30, 2007 10:19 pm
by BlueDodgeRam
umm, ill pass..:D
Posted: Tue Oct 30, 2007 10:22 pm
by Steinberg
BlueDodgeRam wrote:no ring gear spacers for D70s
then I know somebody that would probably make one for you. a low-gear carrier for this axle doesn't seem (to me) like a common item to be floating around.