Wrenching and Technical Information
Moderator: Club Officers
Fizboy
Posts: 166 Joined: Sun Sep 30, 2007 11:17 pmLocation: Blacksburg
Contact:
Post
by Fizboy Tue Feb 03, 2009 2:17 pm
Need a small piece of 3/8th" thick steel for a spacer between my axle and leaf spring. Needs to be about 2"wide by 4"long or bigger. Let me if you have a piece of scrap.
84 Toy PU. 20R, Rear Chevy spring swap, Front 4" Allpro springs, Crap ton of other stuff.
Stinson
Posts: 708 Joined: Thu Dec 07, 2006 11:42 pmLocation: Myersville MD
Post
by Stinson Tue Feb 03, 2009 2:32 pm
take an old leaf and cut it down and put it in the spring pack, thats what I did.
86 toy: the wheeler
jonesy
Posts: 720 Joined: Sat Jan 14, 2006 12:16 amLocation: Blacksburg
Post
by jonesy Tue Feb 03, 2009 8:28 pm
Stinson wrote: take an old leaf and cut it down and put it in the spring pack, thats what I did.
x2
bullydog
Posts: 108 Joined: Tue Dec 02, 2008 8:54 pm
Post
by bullydog Tue Feb 03, 2009 8:32 pm
You in a hurry for it. What size is the centering pin.
Fizboy
Posts: 166 Joined: Sun Sep 30, 2007 11:17 pmLocation: Blacksburg
Contact:
Post
by Fizboy Wed Feb 11, 2009 8:53 pm
I found some thing that will work. Thanks all
84 Toy PU. 20R, Rear Chevy spring swap, Front 4" Allpro springs, Crap ton of other stuff.
