I'm making this post so club members can see what special tools others have. If you've got special tools that you don't mind letting other members use, post up w/ a list and some contact info.
---------------------------------------------------
225AC stick welder (220V-needs dryer or range plug)
80amp POS wirefeed welder (120V)
14" chop saw
Angle grinder
120V sawzall
18V cordless set (sawzall, drill, circ. saw, jigsaw)
Hitch-mounted manual tire changer
Air impact gun and air ratchet
Portable compressed air source (the truck+OBA)
Balljoint press
Tapered reamer for GM 1-ton tierod ends
Pitman arm puller
2/3 jaw puller
Internal/external c-clip tool
Ford 4-prong wheelbearing nut socket
Ford 4-prong balljoint preload socket
Large box-end wrenches (1"-1 5/16")
Small and large Torx bits
Security Torx bits
0-150 ft-lb torque wrench
Some assorted large sockets, various common tools
Dial indicator w/ magnetic base
Digital calipers
Cheap bodyworking hammers and dollies
Dent-puller
Engine hoist (my roomate's)
Giant come-a-long w/ 40ft cable
Contact via email/pm below, or call 609-923-2194
Club Members' Special Tool Inventory
Moderator: Club Officers
Club Members' Special Tool Inventory
Last edited by Steinberg on Mon Mar 12, 2007 11:03 pm, edited 3 times in total.
I have....
Dewalt corded impact
Milwaukee corded orbital sawzall
Oxy-Acetylene cutting torches
1/4, 3/8, and 1/2 nich breaker bars
1/2 inch drive u joint and extensions (about 30" of extensions)
car ramps
slide hammer
18 volt Dewalt cordless hammer drill
10 inch drill press with bits
4 1/2 inch angle grinder
1/2 inch drive male and female torx bits
small vise
electrolysis rust removal set up. (in Roanoke)
I think thats it on the special tools
Dewalt corded impact
Milwaukee corded orbital sawzall
Oxy-Acetylene cutting torches
1/4, 3/8, and 1/2 nich breaker bars
1/2 inch drive u joint and extensions (about 30" of extensions)
car ramps
slide hammer
18 volt Dewalt cordless hammer drill
10 inch drill press with bits
4 1/2 inch angle grinder
1/2 inch drive male and female torx bits
small vise
electrolysis rust removal set up. (in Roanoke)
I think thats it on the special tools
Last edited by tsmall07 on Wed May 23, 2007 4:59 pm, edited 2 times in total.
"The American Indians found out what happens when you don't control immigration."
"Calling an illegal alien an undocumented immigrant is like calling a drug dealer an unlicensed pharmacist"
"Calling an illegal alien an undocumented immigrant is like calling a drug dealer an unlicensed pharmacist"
-
BadAssEddie
- Posts: 2635
- Joined: Sun Sep 27, 2009 11:12 pm
- Location: The Woods
This seemed to have died off too quickly, I will be deleting irroneous posts and updating with my information, I suggest other current members do so as well.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke
-
jacksondemere
- Posts: 17
- Joined: Wed Aug 10, 2011 7:47 pm
Re: Club Members' Special Tool Inventory
id like to get more involved in the club/offroading community, so what better way than to offer some help. things i have:
specialized stuff
220v lincoln stick/arc welder,
16 ton pipe bender
compression tester
tap and die set
2 hlpvs (priimer and paint nozzles)
fiberglassing sprayer and assorted fiberglassing materials
less specialized,
full assortment of air tools, hand tools, jacks, jackstands, etc.
specialized stuff
220v lincoln stick/arc welder,
16 ton pipe bender
compression tester
tap and die set
2 hlpvs (priimer and paint nozzles)
fiberglassing sprayer and assorted fiberglassing materials
less specialized,
full assortment of air tools, hand tools, jacks, jackstands, etc.