Sinking Creek 4WD Association

I'm making this post so club members can see what special tools others have. If you've got special tools that you don't mind letting other members use, post up w/ a list and some contact info.
---------------------------------------------------

225AC stick welder (220V-needs dryer or range plug)
80amp POS wirefeed welder (120V)
14" chop saw
Angle grinder
120V sawzall
18V cordless set (sawzall, drill, circ. saw, jigsaw)

Hitch-mounted manual tire changer

Air impact gun and air ratchet
Portable compressed air source (the truck+OBA)

Balljoint press
Tapered reamer for GM 1-ton tierod ends
Pitman arm puller
2/3 jaw puller
Internal/external c-clip tool
Ford 4-prong wheelbearing nut socket
Ford 4-prong balljoint preload socket
Large box-end wrenches (1"-1 5/16")
Small and large Torx bits
Security Torx bits
0-150 ft-lb torque wrench
Some assorted large sockets, various common tools

Dial indicator w/ magnetic base
Digital calipers

Cheap bodyworking hammers and dollies
Dent-puller

Engine hoist (my roomate's)
Giant come-a-long w/ 40ft cable

Contact via email/pm below, or call 609-923-2194

I have....

Dewalt corded impact
Milwaukee corded orbital sawzall
Oxy-Acetylene cutting torches
1/4, 3/8, and 1/2 nich breaker bars
1/2 inch drive u joint and extensions (about 30" of extensions)
car ramps
slide hammer
18 volt Dewalt cordless hammer drill
10 inch drill press with bits
4 1/2 inch angle grinder
1/2 inch drive male and female torx bits
small vise
electrolysis rust removal set up. (in Roanoke)


I think thats it on the special tools

I've got an SWR meter for tuning CB radios.

mac tools obdII code reader and many hand/power tools and access to more

I have a:
12 ton press
110v mig welder
Metric sockets
Small drill press
Some air tools
Hammer drill
Other tools I don't remember

If you find yourself needing something I might have it.

This seemed to have died off too quickly, I will be deleting irroneous posts and updating with my information, I suggest other current members do so as well.

id like to get more involved in the club/offroading community, so what better way than to offer some help. things i have:

specialized stuff
220v lincoln stick/arc welder,
16 ton pipe bender
compression tester
tap and die set
2 hlpvs (priimer and paint nozzles)
fiberglassing sprayer and assorted fiberglassing materials


less specialized,
full assortment of air tools, hand tools, jacks, jackstands, etc.