toy ifs steering box, flat pitman arm, np203, dana 60 arm

Post by **Billet Benny** » Thu Mar 08, 2007 12:23 pm

Toyota ifs steering box off my '87. $100

NP203 from behind th350. no adapter. $120

Sky Manufacturing flat billet pitman arm for toyota steering box. http://www.sky-manufacturing.com/steering1.htm It's never been used or installed. Tapered for 1 ton Chevy end. $90

Post by **alk1174** » Thu Mar 08, 2007 2:09 pm

I am interested in the pitman arm if it is for an 80 end but I need to check and see if it will fit first. I will check tonight and see.

Post by **Yoda** » Thu Mar 08, 2007 2:30 pm

im interested in the steering box. is it in good condition, ie. have any play or leaks in it?

Post by **Billet Benny** » Thu Mar 08, 2007 10:33 pm

alk1174 wrote:I am interested in the pitman arm if it is for an 80 end but I need to check and see if it will fit first. I will check tonight and see.

Adam,
What's your box?? It'll fit toy ifs and landcruiser boxes I know. Maybe I have a receipt or packing slip that'll tell me about the taper. I really should be able to remember these kinds of things.

Post by **Billet Benny** » Thu Mar 08, 2007 10:34 pm

Yoda wrote:im interested in the steering box. is it in good condition, ie. have any play or leaks in it?

Dirty, but solid. Worked when I pulled it and I didn't see it puking any fluid or anything.

Post by **Yoda** » Fri Mar 09, 2007 10:19 am

i guess ill go ahead and take it off your hands then when i get back down in blacksburg. bring it to one of the meetings and ill pay ya, no rush though.

Post by **Billet Benny** » Fri Mar 09, 2007 11:04 am

Yoda wrote:i guess ill go ahead and take it off your hands then when i get back down in blacksburg. bring it to one of the meetings and ill pay ya, no rush though.

Aight, I'll put it in my truck. Thanks.

Post by **alk1174** » Fri Mar 16, 2007 10:00 am

Billet Benny wrote:
alk1174 wrote:I am interested in the pitman arm if it is for an 80 end but I need to check and see if it will fit first. I will check tonight and see.
Adam,
What's your box?? It'll fit toy ifs and landcruiser boxes I know. Maybe I have a receipt or packing slip that'll tell me about the taper. I really should be able to remember these kinds of things.

Benny
After looking at it I think I will have to pass, It will not work with my setup without some major changes. Should have got one from the start.

Post by **Billet Benny** » Tue Mar 20, 2007 3:31 pm

Yoda wrote:i guess ill go ahead and take it off your hands then when i get back down in blacksburg. bring it to one of the meetings and ill pay ya, no rush though.

You wanna go ahead and get this thing from me? It's in the back of my truck and I don't want it to get rained on anymore as it's rusty enough. Do you still want it?

Also, top post edited..

Post by **Yoda** » Tue Mar 20, 2007 5:11 pm

ill still take that ifs box off your hands, just say when and where you wanna meet.

Post by **Billet Benny** » Wed Apr 04, 2007 7:11 pm

everything in post one still available