Good place to source trailer axle (with brakes)

Post by **shmoken875** » Wed Mar 02, 2011 9:52 pm

Any recommendations?

I spun a bearing on I-83 coming home from Rausch in January. Finally got some time to tear it apart and found this shit:

Had to drill through the castle nut and break it. Cut the outter bearing and grind/chisel the inner bearing.

My 100 year old caliper seems to indicate that I've lost 0.005" in the spun area on the outter. The wiring trailer brake magnet thingy got a little cooked too as there was some flammage at 80mph. I'm leaning towards a new axle, but am open to ideas. What says ye SC4WDA?

If I do need a new one I'm looking for (current axle specs):

WMS - 88.75" ish
Tube - 2.375"
Brakes - 10"
BP - 5 on 4.75" (is 4.75 normal?)

Post by **zach119** » Thu Mar 03, 2011 12:16 am

The shoes look pretty worn in the picture so chances are your other brakes might need replacing soon, and I also assume the other bearings might be getting ready to show wear. I'd personally go ahead and pick up another axle considering the one side needs completely rebuilt. The couple trips a year your able to take with it, I definitely wouldn't want the same thing to happen again to the other side of the trailer another trip or two down the road. I've always bought trailer axles from Northern Tool. I'm sure others will chime in but this is just where i've personally used.

Post by **Arya Ebrahimi** » Thu Mar 03, 2011 7:42 am

www.abctrailerparts.com for all your trailer part needs

I've bought a bunch of stuff from them and found their prices good and service excellent.

Also, do you need any wheels for your trailer? I have a pair of white steel trailer wheels that I believe are 5x4.75 and I have no use for them. If you do, I'll go double check the bolt pattern. They're not mine, but they don't fit the trailer they're for, so I'm trying to get rid of them so I can buy the right wheels.

Post by **shmoken875** » Fri Mar 04, 2011 5:51 pm

Arya Ebrahimi wrote:www.abctrailerparts.com for all your trailer part needs

I've bought a bunch of stuff from them and found their prices good and service excellent.

Also, do you need any wheels for your trailer? I have a pair of white steel trailer wheels that I believe are 5x4.75 and I have no use for them. If you do, I'll go double check the bolt pattern. They're not mine, but they don't fit the trailer they're for, so I'm trying to get rid of them so I can buy the right wheels.

Thanks for the offer, turns out they're 5x5